Instructions / Assembly

ASSEMBLY
STEP 12
1. Attach hinges on Doors K to Sides E using Phillips Screw 9 into guide holes.
2. Attach hinges on Doors L to Divider F using Phillips Screw 9 into guide holes.
3. Attach hinges on Center Shelf I to Flip Down Door N using Phillips Screw 12 .
4. Attach 4 Magnet Plates 6 to bottom corner of Door K and Door L using Phillip
Screw 10 into guide holes.
5. Attach 4 Magnets 6 using Phillip Screw 10 into guide holes on Bottom shelf B .
6. Attach Latch 11 to Divider G and Flip Down Door N using Phillip Screw 10 into guide
holes.
7. Use a Phillips screwdriver to attach Handles 4 to Doors K , L & Flip Down Door N
through pre-drilled holes.
B
18/22
NOTE: The screwdriver is not
included in the hardware pack.
MODEL # AXCHOL005-72-NAB