ARTISAN / HOLDEN / STRATFORD 72 INCH TV STAND MODEL # AXCHOL005-72-NAB 1/22
FOR REPLACEMENT PARTS OR HELP WITH ASSEMBLY PLEASE CONTACT US AT: simpli-home.
ENTER TO WIN Upload an image of our furniture in your home with a short review to our facebook page for a chance to Win up to $3000 of Simpli Home furniture!!! www.facebook.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION Identify all the parts and hardware. Do not discard of the packaging until you have checked that you have all of the parts and hardware required. Hardware package may have spare parts. WARNING: This item contains small parts which can be swallowed by children and pets. Keep children and pets away during assembly.
PRE-ASSEMBLY INFORMATION MODEL # AXCHOL005-72-NAB PARTS DESCRIPTION A B C TOP SHELF QTY 1 BOTTOM SHELF QTY 1 TOP QTY 1 D E F Ba ck Sid e Ba ck Sid e Fro n Sid t e BACK PANEL QTY 1 SET G Fro n Sid t e SIDE QTY 1 PAIR H Ba ck Sid e DIVIDER QTY 1 PAIR I Fro n Sid t e MIDDLE DIVIDER QTY 1 PAIR J K SHELF QTY 2 CENTER SHELF QTY 1 TOP DIVIDER QTY 1 L DOOR QTY 1 PAIR DOOR QTY 1 PAIR NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-
PRE-ASSEMBLY INFORMATION MODEL # AXCHOL005-72-NAB PARTS DESCRIPTION M N FLIP DOWN DOOR QTY 1 BOTTOM SUPPORT LEG QTY 2 P O Q DRAWER SIDE QTY 1 PAIR DRAWER FRONT QTY 1 R DRAWER BACK QTY 1 DRAWER BOTTOM QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION MODEL # AXCHOL005-72-NAB HARDWARE DESCRIPTION 2 1 3 CAM LOCK PIN CAM LOCK QTY 19 SETS ALLEN KEY SCREW M6 X 30 mm QTY 43 6 5 PHILLIPS SCREW ROUND HEAD M4 X 15 mm QTY 39 PHILLIPS SCREW M3 X 12 mm QTY 24 8 PHILLIPS SCREW M4 X 30 mm QTY 8 SHELF SUPPORT QTY 12 MAGNET AND PLATE QTY 4 SETS 12 11 PHILLIPS SCREW M3 X 15 mm QTY 20 HANDLE M4 X 25mm QTY 6 SETS ALLEN KEY QTY 1 7 10 9 4 LATCH QTY 1 SET PHILLIPS SCREW M4 X 15 mm QTY 6 13 a. M4 X 25 - QTY 1 b.
MODEL # AXCHOL005-72-NAB COMPONENTS – KEY DIAGRAM D A G E J L G K P P R O 8/22
ASSEMBLY MODEL # AXCHOL005-72-NAB STEP 1 P 2 2 P 2 O 2 2 2 2 1. Attach 4 Cam Lock Pins 2 to back of Drawer Front O . 2. Align Cam Lock Pins with pre-drilled holes and attach Drawer Sides P . 3. Insert 2 Cam Locks 2 into pre-drilled holes on each Drawer Side P . 4. Use flathead screwdriver secure Cam Locks. STEP 2 P R P O 1. Slide Drawer Bottom R firmly into slots on Drawer Sides P and Drawer Front O .
ASSEMBLY MODEL # AXCHOL005-72-NAB STEP 3 Q 1 3 O 1. Align Drawer Back Q with Drawer Bottom R and press firmly into slot . 2. Attach back using 2 Allen Key Screws 1 through pre-drilled holes on each Side P . 3. Use Allen Key 3 to tighten screws. Do not over-tighten. STEP 4 NOTE: The screwdriver is not included in the hardware pack. 1. Use Phillips screwdriver to attach Handle 4 to Drawer Front O .
ASSEMBLY MODEL # AXCHOL005-72-NAB STEP 5 1. Attach Centre Shelf I to each Middle Divider G using 3 Allen Key Screws 1 . 2. Use Allen Key 3 to tighten screws. Do not over-tighten.
ASSEMBLY MODEL # AXCHOL005-72-NAB STEP 6 NOTE: The screwdriver is not included in the hardware pack. 1. Attach 6 Cam Lock Pins 2 into pre-drilled holes on the bottom of Top Shelf C . 2. Align Cam Lock Pins with pre-drilled holes on Middle Divider G . 3. Insert 3 Cam Lock 2 into pre-drilled holes on each Middle Divider G . 4. Use flathead screwdriver to secure Cam Lock . 5. Attach Top Divider H to Top Shelf C using 3 Allen Key Screws 1 .
ASSEMBLY MODEL # AXCHOL005-72-NAB STEP 7 1. Attach Top Shelf C to each Divider F using 3 Allen Key Screws 1 . 2. Use Allen Key 3 to tighten screws. Do not over-tighten.
ASSEMBLY MODEL # AXCHOL005-72-NAB STEP 8 1. Attach Bottom Shelf B to Dividers F & G using 12 Allen Key Screws 1 (3 Allen Key Screws / each Divider ). 2. Use Allen Key 3 to tighten screws. Do not over-tighten.
ASSEMBLY MODEL # AXCHOL005-72-NAB STEP 9 NOTE: The screwdriver is not included in the hardware pack. 1. Attach 3 Cam Lock Pins 2 to each Side E . 2. Align Cam Lock Pins with pre-drilled holes and attach Bottom Shelf B . 3. Insert 6 Cam Lock 2 into pre-drilled holes on Bottom Shelf B . 4. Use flathead screwdriver to secure Cam Lock . 5. Attach 2 Bottom Support Legs M to Bottom Shelf B using 8 Phillip Screws 8 .
ASSEMBLY MODEL # AXCHOL005-72-NAB STEP 10 1. Attach 3 Cam Lock Pins 2 into pre-drilled holes on bottom of Top A ( at center ). 2. Align Cam Lock Pins with pre-drilled holes on Top Divider H . 3. Insert 3 Cam Locks 2 into pre-drilled holes on Top Divider H . 4. Use flathead screwdriver to secure Cam Lock . 5. Attach 2 Sides E and 2 Dividers F to bottom of Top A using 12 Allen Key Screws 1 ( 3 Allen Key Screws/ each part ).
ASSEMBLY MODEL # AXCHOL005-72-NAB STEP 11 NOTE: The screwdriver is not included in the hardware pack. 1. Attach Back Panels D to back of cabinet using Phillips Screws Round Head 5 into pre-drilled guide holes. 2. Use Phillips screwdriver to tighten screws.
ASSEMBLY MODEL # AXCHOL005-72-NAB STEP 12 NOTE: The screwdriver is not included in the hardware pack. B 1. Attach hinges on Doors K to Sides E using Phillips Screw 9 into guide holes. 2. Attach hinges on Doors L to Divider F using Phillips Screw 9 into guide holes. 3. Attach hinges on Center Shelf I to Flip Down Door N using Phillips Screw 12 . 4. Attach 4 Magnet Plates 6 to bottom corner of Door K and Door L using Phillip Screw 10 into guide holes. 5.
ASSEMBLY MODEL # AXCHOL005-72-NAB STEP 13 1.Use 4 Shelf Supports 7 for each Shelf J in desired location . 2. 2 Shelf Supports 7 may be used on back top of each Shelf J as a tipping restraint. STEP 14 NOTE: The screwdriver is not included in the hardware pack. 13 NOTE: Injuries and damage can occur from furniture tip-over. It is important to use the safety bracket included.
ASSEMBLY MODEL # AXCHOL005-72-NAB STEP 15 NOTE: The screwdriver is not included in the hardware pack. 13 1. To attach Tipping Restraint 13 , follow instructions on Tipping Restraint package. When you determined the location for your unit, install the Furniture Tipping restraint. Carefully follow the instructions contained on the package.
WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.
Questions, problems, missing parts? Before returning your product please email Customer Support at simpli-home.com/customer-support or call Customer Support at 1-866-518-0120 ext. 262 Monday to Friday between 9 am – 4 pm EST For more information visit us on our website www.simpli-home.com Like us on facebook www.facebook.
