Instructions / Assembly

ASSEMBLY
STEP 3
• Place the Headboard (1) in the desired location to determine where
you will mount it on the wall. This will be easier if you have someone
helping you.
• Mark the wall at the bottom edge and side of each lower corner of the
Headboard (1). Do so by drawing two right angles faintly with a pencil.
• Measure from the floor to the pencil marks on the wall. Ensure that
they are both the same distance so that your Headboard (1) will sit
level.
• Draw a soft line connecting the two right angles to indicate the
Headboard's bottom edge using a level. Draw faint lines upward from
the outside edges of your right-angle marks to indicate the
Headboard's sides.