Installation Guide

Model # AXCELA39-SMBAssembly
Step 8
17
NOTE: The screwdriver is not
included in the hardware pack.
1. Attach Magnets 7 to Dividers CL , CR using Phillips Screws 8 into pre-drilled holes
on Divider CL , CR .
2. Attach Magnet Plates 7 using Phillips Screws 8 into pre-drilled holes
on Doors FL , FR .
3. Use Phillips screwdriver to snugly tighten screw.
4. Use Phillips screwdriver to attach Handles 4 to Doors FL , FR through guide hole.
4
8
7
8
7
FL
FL
FR
CL
CR