Instructions / Assembly

3/7
IMPORTANT : Keep this manual for future reference.
CARE and MAINTENANCE
This furniture is designed for indoor use.
Marble tops are factory polished to a smooth gloss finish and are sealed for added
protection. In order to maintain the surface and keep it looking fresh and natural, we
recommend the following procedures:

• For regular cleaning, use a damp cloth with warm water, rinse and dry thoroughly to
prevent streaks.
• Wipe off any spills immediately.
• Never use abrasive cleaners or rough cleaning pads. These types of cleaners can
etch or dull stone surfaces. If necessary, a soft buffing pad can be used.


To help protect your metal furniture, follow these steps:

• Use a humidifier, preferably one with an automatic control system that can
• sense the humidity level and adjust itself accordingly.
• Dust with soft dry cloth.
• Wipe up spills promptly. Clean with a dry cloth.
• Do not use abrasive cleaners, chemical solvents, strong detergents, cleaners with
bleach, and furniture polish.
• Use soft felt base coasters, placemats to help prevent scratches.
• Keep furniture out of direct sunlight, which can cause cracking or roughness on the
protective layer.
• If it can be avoided, do not put furniture near heating vents. Keep the furniture
3 to 4 inches away from the wall, giving heat and air space to circulate.