Instructions / Assembly

STEP-7

1. Align Largel Drawer Back O with Large Drawer Bottom Q and press firmly into slot .

2. Attach Drawer Back using 2 Allen Key Screws 2 through pre-drilled holes on

each Side ML , MR .

3. Use Allen Key 5 to tighten screws. Do not over-tighten.

1. Use Phillips screwdriver to attach Handle 4 to Large Drawer Front K .

Repeat Step 5-8 for the other three large drawers .

STEP-8

13/23

NOTE: The screwdriver is not

included in the hardware pack.

ASSEMBLY MODEL # AXCCRL44-W