Instructions / Assembly

STEP-3

1. Align Small Drawer Back P with Small Drawer Bottom R and press firmly into slot .

2. Attach Drawer Back using 2 Allen Key Screws 2 through pre-drilled holes on

each Side NL , NR .

3. Use Allen Key 5 to tighten screws. Do not over-tighten.

1. Use Phillips screwdriver to attach Handle 4 to Small Drawer Front L .

STEP-4

11/23

Repeat Step 1-4 for the other two small drawers .

NOTE: The screwdriver is not

included in the hardware pack.

ASSEMBLY MODEL # AXCCRL44-W