SIMP IHOME I L I F E B Y D E S I GN COSMOPOLITAN / CITY / ESSEX 72 INCH WIDE TV MEDIA STAND MODEL # AXCRCOS72-MAH 1/23
SIMP IHOME I L I F E B Y D E S I GN Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am – 4 pm EST or go to www.simpli-home.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION CAUTION: Injuries and damage can occur from furniture tip over if product is not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided with the product. Consult our assembly instructions for help.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
PRE-ASSEMBLY INFORMATION MODEL # AXCRCOS72-MAH PARTS DESCRIPTION A BL Fro nt / Ava nt BR Fro nt / Ava nt nt Ava nt / Fro TOP QTY 1 C LEFT SIDE QTY 1 D RIGHT SIDE QTY 1 E Fro nt / Ava nt Fro nt / Ava nt BOTTOM SHELF QTY 1 F TOP SHELF QTY 1 GL Fro nt / Ava nt TOP DIVIDER QTY 1 CENTRE SHELF QTY 1 GR nt Ava nt / Fro LEFT MIDDLE DIVIDER QTY 1 Fro nt / Ava nt RIGHT MIDDLE DIVIDER QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-86
PRE-ASSEMBLY INFORMATION MODEL # AXCRCOS72-MAH PARTS DESCRIPTION HL IL HR Fro nt / t van t/A n o Fr LEFT DIVIDER QTY 1 IR Ava nt J RIGHT SHELF QTY 1 LL K LARGE DOOR (L&R Same) QTY 2 LR LEFT BACK PANEL QTY 1 LEFT SHELF QTY 1 RIGHT DIVIDER QTY 1 Warning Label RIGHT BACK PANEL QTY 1 SMALL DOOR (L&R Same) QTY 2 L1 TOP BACK PANEL QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION MODEL # AXCRCOS72-MAH PARTS DESCRIPTION L2 M PL DRAWER FRONT QTY 1 Q FLIP DOWN DOOR QTY 1 BOTTOM SUPPORT LEG QTY 2 BOTTOM BACK PANEL QTY 1 O N PR LEFT DRAWER SIDE QTY 1 RIGHT DRAWER SIDE QTY 1 R DRAWER BACK QTY 1 DRAWER BOTTOM QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION MODEL # AXCRCOS72-MAH HARDWARE DESCRIPTION 2 1 CAM LOCK PIN CAM LOCK QTY 22 SETS ALLEN KEY SCREW M6 X 30 mm QTY 34 5 6 PHILLIPS SCREW ROUND HEAD M4 X 15 mm QTY 41 9 10 13 b. c. LATCH QTY 1 SET SHELF SUPPORT QTY 12 MAGNET AND PLATE QTY 4 SETS PHILLIPS SCREW M3 X 15 mm QTY 16 a.
COMPONENTS – KEY DIAGRAM MODEL # AXCRCOS72-MAH L2 A Fron t/A vant LL LR HL E GL Fron t/A vant Fron t/A vant BR HR Fron t/A vant D IL BL F L1 IR GR Fron t/A vant Fron t/A vant Fron t/A vant J C J K M N M PR Q PL R K O 9/23
ASSEMBLY MODEL # AXCRCOS72-MAH STEP 1 PR PL O 2 1. Attach 4 Cam Lock Pins 2 to back of Drawer Front O . 2. Align Cam Lock Pins with guide holes and attach Drawer Sides PL , PR . 3. Insert 2 Cam Lock 2 into guide holes on each Drawer Side PL , PR . 4. Use flathead screwdriver to secure Cam Locks. STEP 2 PR R PL O 1. Slide Drawer Bottom R firmly into slots on Drawer Sides PL ,PR and Drawer Front O .
ASSEMBLY MODEL # AXCRCOS72-MAH STEP 3 Q PR 1 R O PL 3 1. Align Drawer Back Q with Drawer Bottom R and press firmly into slot . 2. Attach back using 2 Allen Key Screws 1 through guide holes on each side. 3. Use Allen key 3 to tighten. Do not over tighten. STEP 4 NOTE: The screwdriver is not included in the hardware pack. O 4 1. Use Phillips Screwdriver to attach Handle 4 to Drawer Front O .
ASSEMBLY MODEL # AXCRCOS72-MAH Front / Avant Front / Avant Front / Avant STEP 5 12 GR E GL 1. Insert 6 Dowels 12 into Centre Shelf E . 2. Use rubber mallet to tap Dowels 12 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Align Dowels 12 with guide holes and attach Middle Divider GL , GR . Front / Avant F Front / Avant 1 Front / Avant STEP 6 D GL Front / Avant 3 E GR 2 1. Attach 6 Cam Lock Pins 2 to Top Shelf D . 2.
ASSEMBLY MODEL # AXCRCOS72-MAH STEP 7 D E 2 GR Front / Avant GL Front / Avant Front / Avant Front / Avant Front / Avant HR Front / Avant F HL 1. Attach 3 Cam Lock Pins 2 to each Divider HL , HR . 2. Align Cam Lock Pins guide holes and attach Top Shelf D . 3. Insert 6 Cam Lock 2 into guide holes on Top Shelf D . 4. Use flathead screwdriver to secure Cam Lock. HR Front / Avant HL Front / Avant GL Front / Avant Front / Avant GR Front / Avant STEP 8 3 C 12 1 1.
ASSEMBLY MODEL # AXCRCOS72-MAH BR BL Front / Avant Front / Avant Front / Avant Front / Avant Front / Avant STEP 9 M M C 12 11 2 1. Insert 4 Dowels 12 into Bottom Shelf C . 2. Use rubber mallet to tap Dowels 12 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Attach 3 Cam Lock Pins 2 to each Side BL , BR . 4. Align Cam Lock Pins with guide holes and attach Bottom Shelf C . 5. Align guide holes on Sides BL , BR with Dowels 12 in Bottom Shelf C . 6.
ASSEMBLY MODEL # AXCRCOS72-MAH STEP 10 12 1 3 1 F 3 Front / Avant HL Front / Avant Front / Avant BL GL HR C BR Front / Avant Front / Avant GR Front / Avant A 1. Insert 2 Dowels 12 into top corners of each Side BL , BR . 2. Use rubber mallet to tap Dowels 12 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Align guide holes on bottom corners of Top A with Dowels 12 in Sides BL , BR . 4. Use 15 Allen Key Screws 1 attach Top A to Sides BL , BR , Dividers HL , HR & F .
ASSEMBLY MODEL # AXCRCOS72-MAH Warning Label STEP 11 Fro nt / Ava nt A LR L1 L2 Fro nt / Ava nt LL 5 1. Attach Back Panels LL , LR , L1 , L2 to back of TV stand using Phillips Screws Round Head 5 into guide holes. 2. Use Phillips screwdriver to tighten screws.
ASSEMBLY MODEL # AXCRCOS72-MAH STEP 12 Last Step ( after adjust the door ) First Step 9 9 9 BR A HR J E BL J N HL K K 15 6 1. Attach hinges on Large Doors J to Sides BL , BR and attach hinges on Small Doors K to Dividers HL , HR using Phillips Screws 9 into pre-drill holes: - Using Phillips screwdriver to attach Screws 9 at middle hole of hinges for both top & bottom hinges. - Adjust the door to ensure they are aligned straight & square with bottom shelf & side.
ASSEMBLY MODEL # AXCRCOS72-MAH 13 STEP 13 9 4 A GR N C K J K J 10 7 9 13 1. Attach Magnet Plates 7 to bottom corner of Doors J & K using Phillip Screw 10 into pre-drilled holes on Doors J & K . 2. Attach Magnets 7 using Phillip Screws 10 into pre-drilled holes Bottom Shelf C . 3. Attach Latch 13 into pre-drilled hole on Right Middle Divider GR and Flip Down Door N . 4. Use a Phillips screwdriver to attach Handles 4 into guide holes on Doors J , K , N .
ASSEMBLY MODEL # AXCRCOS72-MAH STEP 14 shelf level 1 shelf support anti - tipping 8 shelf level 2 shelf level 3 8 IR IL 1. Use 4 Shelf Supports 8 for each shelf IL , IR in desired location. 2. 2 Shelf Supports 8 may be used on back top of each shelf IL , IR as a tipping restraint.
ASSEMBLY MODEL # AXCRCOS72-MAH STEP 15 1.
FURNITURE TIP OVER RESTRAINT ASSEMBLY WARNING Serious or fatal crushing injuries can occur from furniture tip-over. If the furniture tip over restraint kit is not in the box, please contact our customer service department in order to obtain another kit before using the furniture. NOTE: The screwdriver is not included in the hardware pack.
FURNITURE TIP OVER RESTRAINT ASSEMBLY Furniture Tip Over Restraint Instructions: 1. Attach one of the mounting brackets securely to the back edge of the furniture. Use the shorter screw. 2. Determine where furniture is to be placed and mark location on the wall for mounting bracket screw hole approximately 2 inches below the bracket mounted to the furniture. x 3. 4. 5. 6. 7. Drill a 3/16 inch hole in the wall.
SIMP IHOME I L I F E B Y D E S I GN WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.
