Full Product Manual

ASSEMBLY MODEL # AXCCOS11-MAH

/2419

1. Attach hinges on Doors G to parts BL , BR , DR using Phillips Screws 8 into pre-drill holes:

- Using Phillips screwdriver to attach Screws 8 at middle hole of hinges for

both top & bottom hinges.

- Adjust the door to ensure they are aligned straight & square with bottom shelf & side.

- Using Phillips screwdriver to tighten the rest of screws 8 into pre-drill holes

( top & bottom holes on hinges).

2. Attach Magnet Plates 7 to bottom corner of Doors G using Phillips Screws 9 into

pre-drilled holes on Doors G .

First Step

Last Step ( after adjust the door )

STEP-