TM SIMP HOME LIFE BY ® DESIG N TM COSMOPOLITAN / CITY / ESSEX SIDEBOARD BUFFET MODEL # AXCCOS11-MAH 1/24
TM SIMP HOME ® LIFE BY DESIG N TM Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am –4 pm EST or go to www.simpli-home.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION CAUTION: Injuries and damage can occur from furniture tip over if product is not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided with the product. Consult our assembly instructions for help.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
PRE-ASSEMBLY INFORMATION . PART DESCRIPTION A MODEL # AXCCOS11-MAH . . BL BR nt /va ntA Fro Fro ntA /va nt Fro ntA /va nt TOP QTY 1 . LEFT SIDE QTY 1 . C RIGHT SIDE QTY 1 . DL DR nt /va ntA Fro Fro ntA /va nt Fro ntA /va nt LEFT DIVIDER QTY 1 BOTTOM FRAME QTY 1 . . EL . ER LEFT SHELF QTY 1 RIGHT DIVIDER QTY 1 F RIGHT SHELF QTY 1 MIDDLE SHELF QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION . PART DESCRIPTION G . . HL HR LEFT BACK PANEL QTY 1 DOOR QTY 3 . MODEL # AXCCOS11-MAH . H RIGHT BACK PANEL QTY 1 . I MIDDLE BACK PANEL QTY 1 . J BOTTOM SUPPORT LEG QTY 1 . KL DRAWER FRONT QTY 3 . KR LEFT DRAWER SIDE QTY 3 Warning Label L RIGHT DRAWER SIDE QTY 3 DRAWER BACK QTY 3 . M DRAWER BOTTOM QTY 3 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION . MODEL # AXCCOS11-MAH HARDWARE DESCRIPTION 1 2 . ALLEN KEY SCREW M6 X 30mm QTY 30 . . 3 CAM LOCK PIN CAM LOCK QTY 18 SETS . 4 ALLEN KEY QTY 1 . 5 HANDLE M4 x 25mm QTY 6 . 6 PHILLIPS SCREW ROUND HEAD M4 X 15mm QTY 26 . 7 SHELF SUPPORT QTY 18 . 8 PHILLIPS SCREW M3 X 12mm QTY 18 MAGNET AND PLATE QTY 3 SETS . 9 . 10 . 11 PHILLIPS SCREW M4 X 30mm QTY 4 PHILLIPS SCREW M3 X 15mm QTY 12 12 WOOD DOWEL Ø8 X 30mm QTY 12 a. M4 X 25mm - QTY 2 ( 1 is extra ) b.
COMPONENTS-KEY DIAGRAM MODEL # AXCCOS11-MAH A Fro ntA/ van t HL H HR Fro ntA/ van t Fro ntA/ van t Fro ntA/ van t Fro ntA/ van t BR DR DL F ER EL BL G Fro ntA/ van t G C G I KR L M KL J 8/24
ASSEMBLY MODEL # AXCCOS11-MAH STEP-1 P 2 X 2 2 J 1. Attach four Cam Lock Pins 2 into pre-drilled holes on Drawer Front J . 2. Use Phillips screwdriver to secure Cam Lock Pins. Do not over-tighten. STEP-2 KL KL 2 KR KR J J 2 2 1. Align Cam Lock Pins with guide holes and attach Drawer Sides KL ,KR to Drawer Front J . 2. Insert two Cam Locks 2 into guide holes on each Drawer Side KL , KR . 3. Use Phillips screwdriver to secure Cam Locks. Do not over-tighten.
ASSEMBLY MODEL # AXCCOS11-MAH STEP-3 1 3 L M KL KL M KR KR J J 1. Slide Drawer Bottom M firmly into slots on Drawer Sides KL , KR and Drawer Front J . 2. Align Drawer Back L with Drawer Bottom M and press firmly into slot . 3. Attach Drawer Back using two Allen Key Screws 1 through guide holes on each Drawer SideKL , KR . UsePhillips screwdriver to tighten Screws. STEP-4 4 J J 1. Use Phillips screwdriver to attach Handle 4 to Drawer Front J . 2. Repeat Step 1-4 for the other drawers.
ASSEMBLY MODEL # AXCCOS11-MAH STEP-5 P X 2 2 2 BL BR nt /va ntA Fro nt /va ntA Fro 11 11 11 1. Attach three Cam Lock Pins 2 into pre-drilled holes on each Side BL , BR . 2. Use Phillips screwdriver to secure Cam Lock Pins. Do not over-tighten. 3. Insert two Wood Dowels 11 into guide holes on each each Side BL , BR . 4. Use rubber mallet to tap Dowels 11 into bottom of holes securely. 1/2 length of Dowels should be exposed.
ASSEMBLY MODEL # AXCCOS11-MAH STEP-6 11 11 Fro ntA /va nt C 11 Fro ntA /va nt DL 11 Fro ntA /va nt DR 11 1. Insert four Wood Dowels 11 into guide holes on Bottom Frame C . 2. Insert two Wood Dowels 11 into guide holes on each Divider DL , DR . 3. Use rubber mallet to tap Dowels 6 into bottom of holes securely. 1/2 length of Dowels should be exposed.
ASSEMBLY MODEL # AXCCOS11-MAH / FrontAvant / FrontAvant STEP-7 DR DL / FrontAvant C / FrontAvant 1. Align Wood Dowels with guide holes and attach Bottom Frame C to Divider DL , DR . / FrontAvant DR / FrontAvant DL 1 C 3 2. Use three Allen Key Screws 1 to attach Bottom Frame C through guide holes from Bottom Frame C to pre-drilled holes of each Divider DL , DR . 3. Use Allen Key 3 to tighten Screws. Do not over-tighten.
ASSEMBLY MODEL # AXCCOS11-MAH / FrontAvant STEP-8 / FrontAvant / FrontAvant BR DR DL / FrontAvant FrontAvant / C BL / FrontAvant 1. Align Cam Lock Pins and Wood Dowels with guide holes and attach Sides BL , BR to Bottom Frame C . / FrontAvant BR 2 DL FrontAvant / / FrontAvant / FrontAvant DR BL C 2. Insert six Cam Locks 2 into guide holes on Bottom Frame C . 3. Use Phillips screwdriver to secure Cam Locks. Do not over-tighten.
ASSEMBLY MODEL # AXCCOS11-MAH / FrontAvant STEP-9 / FrontAvant BR / FrontAvant A FrontAvant / DR / FrontAvant C / FrontAvant DL BL / FrontAvant 1. Align Wood Dowels with guide holes on Top A and attach Top A . BL 1 BR DR 3 C / FrontAvant FrontAvant / / FrontAvant FrontAvant / DL FrontAvant / A 1 3 2. Use three Allen Screws 1 to attach each parts BL , BR , DL , DR through guide holes to Top A . 3. Use Allen Key 3 to tighten Screws. Do not over-tighten.
ASSEMBLY MODEL # AXCCOS11-MAH A / FrontAvant / FrontAvant / FrontAvant FrontAvant / STEP-10 BR DR / FrontAvant / FrontAvant DL BL C I 10 10 1. Attach Bottom Support Leg I align with pre-drilled holes at back of Bottom Frame C . Use Phillips Screwdriver to tighten four Phillips Screws 10 .
ASSEMBLY MODEL # AXCCOS11-MAH Note: The back of the cabinet frame does not have pre-drilled holes to attach the back panels. STEP-11 Fro ntA /va nt A HR Warning Label H HL 5 Fro ntA /va nt A HR H HL 1. Use Phillips Screws Round Head 5 to attach Back Panels HL , HR , H through guide holes to the back of Sideboard. 2. Use Phillips Screwdriver to tighten screws. Do not over-tighten.
ASSEMBLY MODEL # AXCCOS11-MAH STEP-12 A Fro ntA /va nt Fro ntA /va nt BR Fro ntA /va nt Fro ntA /va nt Fro ntA /va nt 9 DR 7 DL Fro ntA /va nt BL C 1. Attach Magnets 7 using Phillips Screws 9 into pre-drilled holes on Bottom Frame C . G 4 2. Use Phillips screwdriver to attach Handles 4 to Doors G through guide hole.
ASSEMBLY MODEL # AXCCOS11-MAH STEP-13 First Step Last Step ( after adjust the door ) 8 8 8 BR A DR BL DL G G C G G 7 9 1. Attach hinges on Doors G to parts BL , BR , DR using Phillips Screws 8 into pre-drill holes: - Using Phillips screwdriver to attach Screws 8 at middle hole of hinges for both top & bottom hinges. - Adjust the door to ensure they are aligned straight & square with bottom shelf & side.
ASSEMBLY MODEL # AXCCOS11-MAH STEP-14 shelf level 1 shelf support anti - tipping shelf level 2 6 shelf level 3 EL F ER 6 1. Use four Shelf Supports 6 for each Shelf F , EL , ER in desired location . 2. Two Shelf Supports 6 may be used on back top of each Shelf F , EL , ER as a tipping restraint.
ASSEMBLY MODEL # AXCCOS11-MAH STEP-15 1. Insert assembled drawers into glides on assembled Sideboard.
FURNITURE TIP OVER RESTRAINT ASSEMBLY WARNING Serious or fatal crushing injuries can occur from furniture tip-over. If the furniture tip over restraint kit is not in the box, please contact our customer service department in order to obtain another kit before using the furniture. STEP-16 NOTE: The screwdriver is not included in the hardware pack.
FURNITURE TIP OVER RESTRAINT ASSEMBLY Furniture Tip Over Restraint Instructions: 1. Attach one of the mounting brackets securely to the back edge of the furniture. Use the shorter screw. x P 2. Determine where furniture is to be placed and mark location on the wall for mounting bracket screw hole approximately 2 inches below the bracket mounted to the furniture. x 3. 4. 5. 6. 7. P Drill a 3/16 inch hole in the wall.
TM SIMP HOME ® LIFE BY DESIG N TM WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.
