Installation Guide
Table Of Contents
Repeat Step 1-4 for the second drawer.
Step 3
1. Use Phillips Screwdriver to attach Handle 9 to Drawer Front J .
Step 4
3. Use Allen Key 4 to tighten screws. Do not over-tighten.
2. Attach back using 2 Allen Key Screws 1 through guide holes on each Side KL , KR .
1. Align Drawer Back L with Drawer Bottom M and press firmly into slot .
NOTE: The screwdriver is not
included in the hardware pack.
KR
KL
J
J
12
Assembly
Model # AXCCON-06-AWH