Connaught / Hampshire / Somerset Tall Storage Cabinet Model # AXCCON-06-AWH 1
Great quality is a right. Thank you for shopping with Simpli Home, America's top brand for high-value furniture. It's time to register your product warranty. It's quick and easy. And you'll be happy you did. ü Ac vate your 1-year warranty ü Automa c entry to win a $500 gi cer ficate ü Earn instant rewards and save simpli-home.
Review your product and collect rewards! Thank you for your purchase! We hope you enjoy it. We’d love your feedback. Please share a review and get instant rewards! simpli-home.com/product-review Share photos and get your cash back! Send us images or share them on social and qualify for instant rewards. You may even receive store credit on your en re purchase! simpli-home.
For Fastest Customer Service: 1. Open your phone’s camera. 2. Point your phone’s camera at the QR code to scan. 3. Click on the pop up. 4. You’ll be taken to our customer service page. 5. Fill the form with your order informa on and issue. 6. Submit form. 7. A customer service associate will contact you. Other ways to contact us… Email Us Visit Us customerservice@simpli-home.com Visit our site directly at www.simpli-home.
IMPORTANT: Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. Safety Information CAUTION: Injuries and damage can occur from furniture tip over if product is not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided with the product. Consult our assembly instructions for help.
Care & Maintenance This furniture is designed for indoor use. Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions. As humidity changes, the components of wooden objects are continually pushing and pulling against each other.
Pre-Assembly Information Model # AXCCON-06-AWH Part Description A BL Fro nt / Ava nt BR nt Ava nt / o r F TOP QTY 1 C Fro nt / Ava nt LEFT SIDE QTY 1 D RIGHT SIDE QTY 1 E Fro nt / Ava nt Fro nt / Ava nt Fro nt / Ava nt LARGE DIVIDER QTY 1 F CENTRE SHELF QTY 1 SMALL DIVIDER QTY 1 G HL Fro nt / Ava nt Fron t / Av ant BOTTOM FRAME QTY 1 CABINET SHELF QTY 4 LEFT DOOR QTY 1 7
Pre-Assembly Information Model # AXCCON-06-AWH Part Description IL HR LEFT BACK QTY 1 RIGHT DOOR QTY 1 J IR KL L RIGHT BACK QTY 1 KR LEFT DRAWER SIDE QTY 2 DRAWER FRONT QTY 2 Warning Label RIGHT DRAWER SIDE QTY 2 M DRAWER BACK QTY 2 DRAWER BOTTOM QTY 2 8
Pre-Assembly Information Model # AXCCON-06-AWH Hardware Description 1 2 ALLEN KEY SCREW M6 X 30 mm QTY 27 5 3 PHILLIPS SCREW ROUND HEAD M4 X 15 mm QTY 24 9 WOOD DOWEL Ø8 X 30 mm QTY 16 CAM LOCK PIN CAM LOCK QTY 16 SETS 6 4 7 8 PHILLIPS SCREW M3 X 12 mm QTY 12 SHELF SUPPORT QTY 24 10 ALLEN KEY QTY 1 11 PHILLIPS SCREW M3 X 15 mm QTY 8 12 a. b. c.
Components - Key Diagram Model # AXCCON-06-AWH Fron t/A van t Fron t/A van t IR IL BR HR HL Fron t/A van t BL Fron t/A van t Fron t/A van t Fron t/A van t Fron t / Av ant KR KL 10
Assembly Model # AXCCON-06-AWH Step 1 KR KL 1. Attach 4 Cam Lock Pins 2 to back of Drawer Front J . 2. Align Cam Lock Pins with guide holes and attach Drawer Sides KL , KR . 3. Insert 2 Cam Locks 2 into guide holes on each Drawer Side KL , KR . 4. Use flathead screwdriver secure Cam Locks. Step 2 KR KL 1. Slide Drawer Bottom M firmly into slots on Drawer Sides KL , KR and Drawer Front J .
Assembly Model # AXCCON-06-AWH Step 3 KR J KL 1. Align Drawer Back L with Drawer Bottom M and press firmly into slot . 2. Attach back using 2 Allen Key Screws 1 through guide holes on each Side KL , KR . 3. Use Allen Key 4 to tighten screws. Do not over-tighten. Step 4 NOTE: The screwdriver is not included in the hardware pack. J 1. Use Phillips Screwdriver to attach Handle 9 to Drawer Front J . Repeat Step 1-4 for the second drawer.
Assembly Model # AXCCON-06-AWH Front / Avant Step 5 Front / Avant 1 4 1. Attach Large Divider C to Centre Shelf E using 3 Allen Key Screws 1 . 2. Use Allen Key 4 to tighten screws. Do not over-tighten. 3 Front / Avant Front / Avant Front / Avant Step 6 2 1. Insert 2 Dowels 3 into pre-drilled holes on Small Divider D . 2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/3 length of Dowels should be exposed. 3. Attach 2 Cam Lock Pins 2 to Centre Shelf E into guide holes. 4.
Assembly Model # AXCCON-06-AWH Front / Avant Step 7 1 Front / Avant 3 Front / Avant Front / Avant Front / Avant Front / Avant 4 1. Insert 2 Dowels 3 into guide holes on Small Divider D . 2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/3 length of Dowels should be exposed. 3. Attach Small Divider D to Bottom Frame F using 3 Allen Key Screws 1 through guide holes. 4. Use Allen Key 4 to tighten screws. Do not over-tighten.
Assembly Model # AXCCON-06-AWH Step 8 2 BR Front / Avant Front / Avant BL 1 4 Front / Avant Front / Avant Front / Avant Front / Avant 3 3 1. Insert 4 Dowels 3 into guide holes on each Side BL , BR . 2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/3 length of Dowels should be exposed. 3. Attach 3 Cam Lock Pins 2 to each Side BL , BR into pre-drilled holes on each Side BL , BR . 4. Align and insert Cam Lock Pins on Sides BL , BR into guide holes on Centre Shelf E . 5.
Assembly Model # AXCCON-06-AWH Step 9 3 1 1 4 Front / Avant BR Front / Avant Front / Avant Front / Avant BL Front / Avant 4 1. Insert 2 Dowels 3 into top corners of each Side BL , BR . 2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/3 length of Dowels should be exposed. 3. Align guide holes bottom corners of Top A with Dowels 3 in Sides BL , BR . 4. Attach Top A to Sides BL , BR and Large Divider C using 9 Allen Key Screws 1 . 5. Use Allen Key 4 to tighten screws.
Assembly Model # AXCCON-06-AWH Step 10 NOTE: The screwdriver is not included in the hardware pack. Warning Label Fro nt / Ava nt IR Fro nt / Ava nt IL 1. Using Phillips screws Round Head 5 to a ach Back Panels IL , IR through guild holes from Back Panels to the back of Cabinet. 2. Use Phillips screwdriver to ghten screws. Do not over-tighten.
Assembly Model # AXCCON-06-AWH Step 11 First Step Last Step ( after adjust the door ) 7 7 7 HR BR BL HL 1. Attach hinges on Doors HL , HR to Sides BL , BR using Phillips Screws 7 into pre-drill holes: - Using Phillips screwdriver to attach Screws 7 at middle hole of hinges for both top & bottom hinges. - Adjust the door to ensure they are aligned straight & square with bottom shelf & side.
Assembly Model # AXCCON-06-AWH Step 12 NOTE: The screwdriver is not included in the hardware pack. 11 HR BR BL 10 8 HL 8 10 1. Attach Magnet Plates 10 to bottom corner of Doors HL , HR using Phillips Screws 8 . into pre-drilled holes on Doors HL , HR . 2. Attach Magnets 10 to Centre Shelf E using Phillips Screws 8 into pre-drilled holes on Centre Shelf E . 3. Use Phillips screwdriver attach Handles 11 to Doors HL , HR .
Assembly Model # AXCCON-06-AWH Step 13 A shelf level 1 shelf support anti - tipping shelf level 2 6 shelf level 3 G G G G 6 G G 1. Attach 4 Shelf Supports 6 underneath of each Shelf G in desired location. 2. 2 Shelf Supports 6 must be attached on back top of each Shelf G as a tipping restraint.
Assembly Model # AXCCON-06-AWH Step 14 1. Insert assembled Drawers into drawer glides on assembled cabinet.
Furniture Tip Over Restraint Assembly WARNING Serious or fatal crushing injuries can occur from furniture tip-over. If the furniture tip over restraint kit is not in the box, please contact our customer service department in order to obtain another kit before using the furniture. Step 15 NOTE: The screwdriver is not included in the hardware pack.
Furniture Anti-Tipping Restraint Instructions 1. Attach one of the mounting brackets securely to the back edge of the furniture. Use the shorter screw. 2. Determine where furniture is to be placed and mark location on the wall for mounting bracket screw hole approximately 2 inches below the bracket mounted to the furniture. 3. Drill a 3/16 inch hole in the wall. Press the plastic anchor into the hole and gently tap until the flange on the anchor is against the wall surface.
