Installation Guide

ASSEMBLY
STEP 8
13/20
A
C
3
2
1. Insert two Dowels 3 into guide holes at top corners of each Side BL , BR .
2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Attach six Cam Lock Pins 2 into pre-drilled holes at the bottom of Top A .
4. Align Cam Lock Pins with guide holes and attach Sides BL , BR .
5. Align guide holes on bottom corners of Top A with Dowels 3 in Sides BL , BR .
6. Insert three Cam Locks 2 into guide holes on each Side BL , BR .
7. Use flathead screwdriver to secure Cam Lock.
8. Use three Allen Key Screws 1 attach Top A to each Divider DL , DR through guide
holes from Dividers. Do not over-tighten.
DL
DR
BL
BR
Fr
ont /
Av
ant
Fr
o
nt
/ Av
a
nt
F
r
on
t
/ A
va
nt
Fr
ont
/
A
v
ant
Fr
o
nt /
A
van
t
Fr
o
nt
/
A
vant
1
4
MODEL # AXCBURTVS-MSB