Instructions/Assembly Guide

F
r
on
t /
A
vant
F
r
ont /
Avan
t
ASSEMBLY
STEP 8
13/21
1. Insert two Dowels 3 into guide holes at top corners of each Side BL , BR .
2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Attach six Cam Lock Pins 2 into pre-drilled holes at the bottom of Top A .
4. Align Cam Lock Pins with guide holes and attach Sides BL , BR .
5. Align guide holes on bottom corners of Top A with Dowels 3 in Sides BL , BR .
6. Insert three Cam Locks 2 into guide holes on each Side BL , BR .
7. Use flathead screwdriver to secure Cam Lock.
8. Use three Allen Key Screws 1 attach Top A to each Divider DL , DR through guide
holes from Dividers. Do not over-tighten.
MODEL # AXCBUR17-RNAB
Fr
on
t / Av
ant
Fr
o
nt / Av
a
nt
Fr
ont /
Avant
F
r
o
n
t
/
Av
ant
C
BL
BR
DL
DR
A
2
3
1
4