Installation Guide

/179
STEP-2
ASSEMBLY
MODEL # AXCBSAVN08-WH
P
X
1
1
9
4
3
9
G
1. Attach four Cam Lock Pins 1
into pre-drilled holes on Door G .
2. Attach Magnet Plate 4 using Phillips Screws 9 into
pre-drilled holes on Door G .
3. Attach Hinge 3 to Door G using Phillip Screws 9 into pre-drilled holes on Door G .
4. Use Phillips screwdriver to secure Cam Lock Pins and Screws. Do not over-tighten.
2
2
2
2
2
D
E
5. Insert four Wood Dowels 2 into guide holes on parts D , E .
6. Use rubber mallet to tap Dowels 2 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
7. Attach Magnet 4 using Phillips Screws 9 into pre-drilled holes on part E .
8. Use Phillips screwdriver to secure Screws. Do not over-tighten.
9
4