SIMP HOME I ® I L I F E B Y D E S I GN BEDFORD / FREEMONT / HAMPTON LOW STORAGE MEDIA CABINET MODEL # AXCBED-03LGB 1/16
SIMP HOME I I ® L I F E B Y D E S I GN Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am – 4 pm EST or go to www.simpli-home.
/16
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
PRE-ASSEMBLY INFORMATION MODEL # AXCBED-03LGB PARTS DESCRIPTION A BL BR Fro nt / Ava nt Fro nt / Ava nt nt Ava nt / Fro TOP QTY 1 C LEFT SIDE QTY 1 D RIGHT SIDE QTY 1 E Fro nt / Ava nt Fro nt / Ava nt CABINET SHELF QTY 2 BOTTOM SHELF QTY 1 GR GL F DOOR (L&R Same) QTY 2 CENTRE SUPPORT QTY 1 LEFT BACK PANEL QTY 1 Warning Label RIGHT BACK PANEL QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION MODEL # AXCBED-03LGB HARDWARE DESCRIPTION 1 2 CAM LOCK PIN CAM LOCK QTY 6 SETS ALLEN KEY SCREW M6 X 30 mm QTY 6 4 3 5 7 6 PHILLIPS SCREW M3 X 15 mm QTY 8 PHILLIPS SCREW M3 X 12 mm QTY 12 8 HANDLE M4 X 25 mm QTY 2 SETS ALLEN KEY QTY 1 PHILLIPS SCREW ROUND HEAD M4 X 15 mm QTY 15 9 MAGNET AND PLATE QTY 2 SETS SHELF SUPPORT QTY 12 11 10 a. M4 X 25 - QTY 2 ( 1 is extra ) WOOD DOWEL Ø8 X 30 mm QTY 4 b. M4 X 15 - QTY 1 c.
COMPONENTS – KEY DIAGRAM MODEL # AXCBED-03LGB Fron t/A vant A GL GR E BR C C BL Fron t/A vant Fron t/A vant Fron t/A vant Fron t/A vant D F F 7/16
ASSEMBLY MODEL # AXCBED-03LGB STEP 1 Front / Avant D BR Front / Avant Front / Avant NOTE: The screwdriver is not included in the hardware pack. BL 10 2 1. Insert 4 Dowels 10 into guide holes on Bottom Shelf D . 2. Use rubber mallet to tap Dowels 10 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Attach Cam Lock Pins 2 into pre-drilled holes on the Sides BL , BR . 4. Align and insert Cam Lock Pins 2 into guide holes on Bottom Shelf D . 5.
ASSEMBLY MODEL # AXCBED-03LGB Front / Avant Front / Avant STEP 2 D Front / Avant Front / Avant E 1 3 1. Attach Centre Support E to Bottom Shelf D using Allen Key Screws 1 through guide holes. 2. Use Allen Key 3 to tighten. Do not over-tighten.
ASSEMBLY MODEL # AXCBED-03LGB STEP 3 1 2 Front / Avant BL Front / Avant 3 Front / Avant A Front / Avant Front / Avant E D BR 1. Attach Cam Lock Pins 2 into pre-drilled at the bottom of Top A . 2. Align pre-drilled holes on bottom of Top A with guide holes on Sides BL , BR and align and insert Cam Lock Pins 2 into guide holes in Centre Support E . 3. Attach Top A with Sides BL , BR using Allen Key Screws 1 use Allen Key 3 to tighten Screws. Do not over-tighten. 4.
ASSEMBLY MODEL # AXCBED-03LGB Triangle ruler STEP 4 ° ° NOTE: The triangle ruler is not included in the hardware pack. 90 90 90 ° 90 ° ° STEP 5 ° ° 90 90 90 90 ° Adjust the cabinet frame before assembling the back panels. Warning Label A Fro nt / Ava nt 6 GR GL Fro nt / Ava nt 1. Attach Back Panels GL , GR to back of cabinet using Phillips Screws Round Head 6 through guide holes 2. Use Phillips Screwdriver to tighten screws. Do not over-tighten.
ASSEMBLY MODEL # AXCBED-03LGB Last Step ( after adjust the door ) First Step STEP 5 4 4 4 F Fro nt / Ava nt BR BL E Fro nt / Ava nt F D 8 Fro nt / Ava nt Fro nt / Ava nt 5 8 7 1. Attach hinges on Doors F to Sides BL , BR using Phillips Screws 4 into pre-drill holes: - Using Phillips screwdriver to attach Screws 4 at middle hole of hinges for both top & bottom hinges. - Adjust the door to ensure they are aligned straight & square with bottom shelf & side.
ASSEMBLY MODEL # AXCBED-03LGB STEP 6 shelf level 1 shelf support anti - tipping shelf level 2 9 shelf level 3 C 9 C C C 1. Attach 4 Shelf Supports 9 for each Shelf C in desired location. 2. 2 Shelf Supports 9 may be used on back top of each Shelf C as a tipping restraint.
FURNITURE TIP OVER RESTRAINT ASSEMBLY WARNING Serious or fatal crushing injuries can occur from furniture tip-over. If the furniture tip over restraint kit is not in the box, please contact our customer service department in order to obtain another kit before using the furniture. NOTE: The screwdriver is not included in the hardware pack.
FURNITURE TIP OVER RESTRAINT ASSEMBLY Furniture Tip Over Restraint Instructions: 1. Attach one of the mounting brackets securely to the back edge of the furniture. Use the shorter screw. 2. Determine where furniture is to be placed and mark location on the wall for mounting bracket screw hole approximately 2 inches below the bracket mounted to the furniture. x 3. 4. 5. 6. 7. Drill a 3/16 inch hole in the wall.
SIMP HOME I I ® L I F E B Y D E S I GN WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.
