Installation Guide

/259
STEP-1
ASSEMBLY
MODEL # AXCBCGAT-07
1. Attach Magnet 4 using Phillips Screws 10 into pre-drilled holes on part F .
2. Use Phillips screwdriver to secure Screws. Do not over-tighten.
3. Insert one Dowel 2 into guide holes on part F .
4. Use rubber mallet to tap Dowel 2 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
Front /
Avant
F
2
10
10
4
2