TM ® SIMP HOME LIFE BY DESIG N TM DRAPER / BAXTER / TIERNEY BATH STORAGE TOWER MODEL # AXCBCDRP-05 1/20
TM ® SIMP HOME LIFE BY DESIG N TM Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am –4 pm EST or go to www.simpli-home.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION CAUTION: Injuries and damage can occur from furniture tip over if product is not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided with the product. Consult our assembly instructions for help.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
PRE-ASSEMBLY INFORMATION . PART DESCRIPTION A MODEL # AXCBCDRP-05 . . BL BR / tnorF tnavA tnavA / tnorF tnavA / tnorF TOP QTY 1 . LEFT SIDE QTY 1 . C RIGHT SIDE QTY 1 . D E tnavA / tnorF BOTTOM QTY 1 . MIDDLE SHELF QTY 2 . F . G1 G2 LEG (L&R Same) QTY 2 BOTTOM SHELF QTY 1 . TOP SHELF QTY 2 LEG (L&R Same) QTY 2 .
PRE-ASSEMBLY INFORMATION . MODEL # AXCBCDRP-05 HARDWARE DESCRIPTION 1 2 . CAM LOCK PIN CAM LOCK QTY 16 SETS . . 3 MAGNET AND PLATE QTY 1 SET ADJUSTABLE HINGE QTY 2 . 4 . 5 PHILLIPS SCREW M4 X 15mm QTY 20 SHELF SUPPORT QTY 12 . 6 . 7 . 8 . 9 ALLENKEYBOLTM : 6X50mmQ - TY8 LOCKWASHERØ : 10/Ø6X15.mmQ - TY8 WASHERØ : 16/Ø6X1mmQ - TY8 PHILLIPS SCREW ROUND HEAD M4 X 15mm QTY 4 PHILLIPS SCREW M3 X 15mm QTY 4 QTY 8 SETS ALLEN KEY QTY 1 . 10 11 a.M4X25mm-QTY2 (1siextra) b.M4X15mm-QTY1 c.
COMPONENTS-KEY DIAGRAM A MODEL # AXCBCDRP-05 Aanvt /oFrnt I E BL BR D E D F Aanvt /oFrnt Aanvt /oFrnt C Aanvt /oFrnt H G2 G1 G1 G2 7/20
ASSEMBLY MODEL # AXCBCDRP-05 STEP-1 9 8 G2 G1 G1 C G2 1. Attach Legs G1, G2 to Bottom C . 2. Use eight Allen Key Bolts 8 , eight Lock Washers 8 and eight Washers 8 to secure part C and G1 ,G2. 3. Use Allen Key 9 to tighten Bolts. Do not over-tighten P STEP-2 1 X 1 C 1 Avant For/nt 1. Attach Cam Lock Pins 1 into pre-drilled holes on part C . 2. Use Phillips screwdriver to secure Cam Lock Pins. Do not over-tighten.
ASSEMBLY MODEL # AXCBCDRP-05 P STEP-3 X 1 1 1 A /oFnrt ntaAv BR 6 ntaAv /oFnrt 1 BL ntaAv /oFnrt 1 3 1. Attach Cam Lock Pins 1 into pre-drilled holes on parts A , BL , BR . 2.AttachMagnet3usingPhilpsScrews6intopre-driledholesonLeftSideBL. 3. Use Phillips screwdriver to secure Cam Lock Pins and Screws. Do not over-tighten.
ASSEMBLY MODEL # AXCBCDRP-05 STEP-4 BL Fron/t D Avant D 1. Align Cam Lock Pins with guide holes on parts D and attach parts D to Left Side BL . 1 BL D Fron/t Avant D 2. Insert two Cam Locks 1 into guide holes on each part D . 3. Use Phillips screwdriver to secure Cam Locks.
ASSEMBLY MODEL # AXCBCDRP-05 STEP-5 D Fron/t Avant D Fron/t Avant BR BL D Fron/t Avant D 1 Fron/t Avant BR BL 1. Repeat Step-4 for the Right Side BR .
ASSEMBLY MODEL # AXCBCDRP-05 STEP-6 BL BL BR BR Aanvt /oFrnt Aanvt /oFrnt Aanvt Aanvt /oFrnt /oFrnt C C 1 1. Align Cam Lock Pins with guide holes on parts BL , BR and attach part C to parts BL , BR . 2. Insert two Cam Locks 1 into guide holes on each part BL , BR . 3. Use Phillips screwdriver to secure Cam Locks.
ASSEMBLY MODEL # AXCBCDRP-05 alciV ter/deU iSp STEP-7 I BR BL Aanvt Aanvt /oFrnt /oFrnt C t Avan t/ Fron 1. Slide Back Panel I firmly into slots on Sides BL , BR and Bottom Shelf C .
ASSEMBLY MODEL # AXCBCDRP-05 STEP-8 1 A Aanvt /oFrnt A I BL BR BL BR Aanvt /oFrnt Aanvt /oFrnt 1. Align Cam Lock Pins with guide holes on parts BL , BR and attach part A to Sides BL , BR . 2. Insert two Cam Locks 1 into guide holes on each part BL , BR . 3. Use Phillips screwdriver to secure Cam Locks.
ASSEMBLY MODEL # AXCBCDRP-05 A STEP-9 tnavA / ontrF BR BL 5 10 I 7 tnavA / ontrF C 1. Attach the Back Panel I to back frame using Phillips Screws Round Head 7 through guide holes from Back Panels. 2. Attach the Corners Support 10 to back frame using Phillips Screws 5 through guide holes from Corners Support 10 . 3. Use Phillips Screwdriver to tighten screws. Do not over-tighten. STEP-10 4 E E tnavA / ontrF F 1. Use four Shelf Supports 4 for each Cabinet Shelf E , F in desired location.
ASSEMBLY MODEL # AXCBCDRP-05 STEP-11 3 6 H 5 2 1. Attach Adjustable Hinges 2 to Door H using Phillips Screws 5 into pre-drilled holes on Door H . 2.AttachMagnetPlate3totopcornerofDoorHusingPhilpsScrews6into pre-driledholesonDoorH. STEP-12 BR 2 5 H 1. Attach Adjustable Hinges 2 on Door H to Right Side BR using Phillips Screws 5 into pre-drilled holes on Right Side BR . 2. Use Phillips screwdriver to snugly tighten screws.
ASSEMBLY MODEL # AXCBCDRP-05 STEP-13 IMPORTANT NOTE: 5 II I Tighten the Screw marked II to fasten hinge. The door may need to be adjusted so that all the spaces between the door and the unit sides are equal. To adjust, follow instructions: 1. Side adjustment 4 mm To move the door towards the side panel, loosen screw I and tighten screw II . To move the door away from the side panel, loosen screw II and tighten screw I . 2.
FURNITURE TIP OVER RESTRAINT ASSEMBLY WARNING Serious or fatal crushing injuries can occur from furniture tip-over. If the furniture tip over restraint kit is not in the box, please contact our customer service department in order to obtain another kit before using the furniture. STEP-14 NOTE: The screwdriver is not included in the hardware pack.
FURNITURE TIP OVER RESTRAINT ASSEMBLY Furniture Tip Over Restraint Instructions: 1. Attach one of the mounting brackets securely to the back edge of the furniture. Use the shorter screw. x P 2. Determine where furniture is to be placed and mark location on the wall for mounting bracket screw hole approximately 2 inches below the bracket mounted to the furniture. P x 3. 4. 5. 6. 7. Drill a 3/16 inch hole in the wall.
TM ® SIMP HOME LIFE BY DESIG N TM WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.