Installation Guide

ASSEMBLY
9
Assembling to the Wall (requires 2 people)
□ Place cabinet in a desired location against a wall.
□ Using a level, mark two holes on the wall through the holes of the inside of the cabinet.
□ Drill two holes in the wall where marked.
□ Insert two plastic anchors (JJ) into the holes.
□ Align the holes in the cabinet with the holes in the wall, then insert two screws (II) through the holes on the back of cabinet into the
plastic anchors (JJ) and tighten the cabinet to the wall.
10
Assembling the Shelf
□ Insert four shelf supports (OO) into the holes in the cabinet on both side panels (B) and (C) at the same level.
□ Insert the middle shelf (F) into the cabinet on top of the shelf supports (OO).