Instructions / Assembly

ASSEMBLY
7
Assembling the Door
□ Attach the door (E) to the left side panel (B) by inserting four screws (KK) through the holes on the hinges (LL) and tighten.
□ Attach the handle (HH) to the door (E) by inserting two screws (GG) through holes on the door (E), then tighten the handle (HH) using
a Phillips screwdriver.
8
Attaching to the Wall (if desired)
□ According to the position of the bracket (NN) assembled to the cabinet, drill a hole on the wall.
□ Insert one plastic anchor (JJ) into the hole on the wall then attach another bracket (NN) to the plastic anchor (JJ).
□ Insert one screw (II) through bracket (NN) and tighten to the plastic anchor (JJ).
□ Place the cabinet against the wall.
□ Insert the cable (PP) through the bracket (NN) on the cabinet then through the bracket (NN) on the wall. Fasten the cable (PP) to
affix two brackets (NN) firmly.