Instructions / Assembly
ASSEMBLY
1
Assembling the Left and Right Side Panel
□ Lay down the left side panel (B) and screw four cam bolts (BB) into the pre-drilled holes by using a Phillips screwdriver.
□ Lay down the right side panel (C) and screw four cam bolts (BB) into the pre-drilled holes by using a Phillips screwdriver.
□ Attach the magnet (FF) to the right side panel (C).
□ Insert two screws (EE) through holes on magnet (FF) then tighten to the right side panel (C) using a Phillips screwdriver.
2
Assembling the Door
□ Lay down the door (E) and attach two metal hinges (LL) to the door (E) by inserting four screws (KK) through the holes on the metal
hinge (LL) and tighten to the door (E) using a Phillips Screwdriver.
□ Attach the magnet plate (MM) to the door (E) by inserting one screw (KK) through the hole on the magnet plate (MM) and tighten to
the door (E) using a Phillips screwdriver.










