Instructions / Assembly
ASSEMBLY
1
Assembling the Cabinet Top, Left Side Panel and Right Side Panel
□ Lay down the cabinet top (A) and screw four cam bolts (BB) into the pre-drilled holes using a Phillips screwdriver.
□ Lay down the left side panel (B) and screw eight cam bolts (BB) into the pre-drilled holes using a Phillips screwdriver.
□ Insert two screws (EE) through holes on magnet (FF) and tighten to left side panel (B) using a Phillips screwdriver.
□ Lay down the right side panel (C) and screw eight cam bolts (BB) into the pre-drilled holes using a Phillips screwdriver.
□ Do not over-tighten.
2
Assembling the Door
□ Lay down the door (D) and attach two metal hinges (LL) to the door (D) by inserting four screws (KK) through the holes on the metal
hinges (LL). Tighten to the door (D) using a Phillips screwdriver.
□ Attach the magnet plate (MM) to the door (D) by inserting one screw (KK) through the hole on the magnet plate (MM) and tighten to
the door (D).










