TM SIMP HOME ® LIFE BY DESIG N TM ARTISAN / HOLDEN / STRATFORD MEDIUM STORAGE CABINET MODEL # AXCART15-TB 1/19
TM SIMP HOME ® LIFE BY DESIG N TM Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am –4 pm EST or go to www.simpli-home.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION CAUTION: Injuries and damage can occur from furniture tip over if product is not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided with the product. Consult our assembly instructions for help.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
PRE-ASSEMBLY INFORMATION . PART DESCRIPTION A MODEL # AXCART15-TB . . BL BR For/nt /ontrF For/nt Avant tnaAv TOP QTY 1 LEFT SIDE QTY 1 . . C RIGHT SIDE QTY 1 . DL /oFrnt DR Anatv CENTRE SUPPORT QTY 1 . LEFT DOOR QTY 1 . E RIGHT DOOR QTY 1 . F /ontrF Avant GL tnaAv BOTTOM SHELF QTY 1 CABINET SHELF QTY 4 LEFT BACK PANEL QTY 1 .
PRE-ASSEMBLY INFORMATION . MODEL # AXCART15-TB HARDWARE DESCRIPTION 2 1 . ALLEN KEY SCREW M6 X 30mm QTY 9 . 3 CAM LOCK PIN CAM LOCK QTY 9 SETS . ALLEN KEY QTY 1 . 4 . 5 HANDLE M4 X 30 mm QTY 2 SETS 6 PHILLIPS SCREW M3 X 12mm QTY 12 . PHILLIPS SCREW M3 X 15mm QTY 8 . 7 . 8 PHILLIPS SCREW ROUND HEAD M4 X 15mm QTY 23 9 MAGNET AND PLATE QTY 2 SETS SHELF SUPPORT QTY 24 . . 11 10 a. b. c.
COMPONENTS-KEY DIAGRAM For/nt A MODEL # AXCART15-TB Avant GL GR For/nt For/nt For/nt Avant Avant C Avant F F BL BR F F For/nt Avant E DR DL 7/19
ASSEMBLY MODEL # AXCART15-TB STEP-1 P X 2 For/nt Avant 2 For/nt 2 BL For/nt Avant BR For/nt Avant BL Avant BR 1. Attach three Cam Lock Pins 2 into pre-drilled holes on each Side BL,BR . 2. Use Phillips screwdriver to secure Cam Lock Pins. Do not over-tighten. 10 10 Avant For/nt For/nt E Avant E 10 1. Insert four Dowels 10 into guide holes on Bottom Shelf E . 2. Use rubber mallet to tap Dowels 10 into bottom of holes securely. 1/2 length of Dowels should be exposed.
ASSEMBLY MODEL # AXCART15-TB Fron/t Avant Avant STEP-2 BL Avant Fron/t Avant Fron/t E BL Fron/t E BL 2 E Fron/t Avant Fron/t Avant 2 1. Align Cam Lock Pins and Wood Dowels with guide holes and attach Bottom Shelf E to Left Side BL . 2. Insert three Cam Locks 2 into guide holes on Bottom Shelf E . 3. Use Phillips screwdriver to secure Cam Locks. Do not over-tighten.
ASSEMBLY MODEL # AXCART15-TB BR Front/ Avant Front/ Avant Front/ Avant STEP-3 BL BR Front/ Avant Front/ Avant Front/ Avant E BL 2 E 2 1. Repeat Step-2 for the Right Side BR .
ASSEMBLY MODEL # AXCART15-TB Front/ Avant Front/ Avant STEP-4 C Front/ Avant BR E Front/ Avant BL 1 Front/ Avant Front/ Avant Front/ Avant 1 BR 3 BL Front/ Avant C E 1. Attach Centre Support C to Bottom Shelf E using three Allen Key Screws 1 through guide holes. 2. Use Allen Key 3 to tighten Screws. Do not over-tighten.
ASSEMBLY MODEL # AXCART15-TB STEP-5 P X 2 2 Avant Fron/t A Fron/t Avant A 1. Attach three Cam Lock Pins 2 into pre-drilled holes on Top A . 2. Use Phillips screwdriver to secure Cam Lock Pins. Do not over-tighten.
ASSEMBLY MODEL # AXCART15-TB STEP-6 A A tnavA tnavA / tnorF tnavA / tnorF tnavA / tnorF BL tnavA / tnorF / tnorF tnavA C C BL BR BR / tnorF tnavA E tnavA / tnorF / tnorF / tnorF E A 2 / tnorF / tnorF tnavA tnavA / tnorF tnavA BL tnavA / tnorF tnavA / tnorF tnavA C BR E 2 1. Align Cam Lock Pins with guide holes on Centre Support C and attach Top A . 2. Insert three Cam Locks 2 into guide holes on Centre Support C . 3.
ASSEMBLY MODEL # AXCART15-TB STEP-7 90 ° ° 90 NOTE: The triangle ruler is not included in the hardware pack. ° 90 90 ° Triangle ruler Adjust the cabinet frame before assembling the back panels. 90 ° 90° 90° 90 ° STEP-8 Note: Thebackofthecabinetframedoesnothave pre-driledholestoattachthebackpanels. /oFrnt Anatv Warning Label 7 /ontrF tnaAv GL GR 1. Attach Back Panels GL , GR to back of cabinet using Phillips Screws Round Head 5 through guide holes. 2.
ASSEMBLY MODEL # AXCART15-TB First Step STEP-9 A BL 5 BR C Last Step ( after adjust the door ) DR DL 5 E 5 1.AttachhingesonDoorsDL,DRtoSidesBL,BRusingPhilpsScrews5intopre-drilholes: - UsingPhilpsscrewdrivertoattachScrews5atmiddleholeofhingesfor bothtop&bottomhinges. -Adjustthedoortoensuretheyarealignedstraight&squarewithbottomshelf&side. -UsingPhilpsscrewdrivertotightentherestofscrews5intopre-drilholes (top&bottomholesonhinges). BL C BR 4 DR 6 DL E 6 8 2.
ASSEMBLY STEP-10 MODEL # AXCART15-TB shelf support anti - tipping shelf level 1 9 shelf level 2 shelf level 3 F F 9 F 1.UsefourShelfSupports9forofeachCabinetShelfFindesiredlocation. 2.TwoShelfSupports9maybeusedonbacktopofeachCabinetShelfFasa tippingrestraint .
FURNITURE TIP OVER RESTRAINT ASSEMBLY WARNING Serious or fatal crushing injuries can occur from furniture tip-over. If the furniture tip over restraint kit is not in the box, please contact our customer service department in order to obtain another kit before using the furniture. STEP-11 NOTE: The screwdriver is not included in the hardware pack.
FURNITURE TIP OVER RESTRAINT ASSEMBLY Furniture Tip Over Restraint Instructions: 1. Attach one of the mounting brackets securely to the back edge of the furniture. Use the shorter screw. x P 2. Determine where furniture is to be placed and mark location on the wall for mounting bracket screw hole approximately 2 inches below the bracket mounted to the furniture. x 3. 4. 5. 6. 7. P Drill a 3/16 inch hole in the wall.
TM SIMP HOME ® LIFE BY DESIG N TM WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.
