SIMP HOME I ® I L I F E B Y D E S I GN AMHERST / HALIFAX / WASHINGTON TV MEDIA STAND MODEL # AXCA MH-TV-RNAB 1/19
SIMP HOME I I ® L I F E B Y D E S I GN Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am – 4 pm EST or go to www.simpli-home.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION CAUTION: Injuries and damage can occur from furniture tip over if product is not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided with the product. Consult our assembly instructions for help.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
MODEL # AXCAMH-TV-RNAB PRE-ASSEMBLY INFORMATION PARTS DESCRIPTION A BL BR Fro nt / Ava nt nt Ava nt / Fro TOP QTY 1 LEFT SIDE QTY 1 D C RIGHT SIDE QTY 1 Fro nt / Ava nt EL Fro nt / Ava nt nt Ava nt / Fro BOTTOM SHELF QTY 1 TOP SHELF QTY 1 G1 F ER LEFT DIVIDER QTY 1 Fro nt / Ava nt G2 SHELF QTY 2 DOOR (L&R Same) QTY 2 RIGHT DIVIDER QTY 1 H SHELF QTY 2 I BOTTOM BACK PANEL QTY 1 TOP BACK PANEL QTY 1 Warning Label JL JR LEFT BOTTOM BACK PANEL QTY 1 RIGHT BOTTOM BACK PANEL QTY 1
PRE-ASSEMBLY INFORMATION MODEL # AXCAMH-TV-RNAB HARDWARE DESCRIPTION 1 CAM LOCK PIN CAM LOCK QTY 18 SETS ALLEN KEY SCREW M6 X 30 mm QTY 12 4 5 7 8 ADJUSTABLE HINGE QTY 4 10 ALLEN KEY QTY 1 6 WOOD DOWEL Ø8x30 QTY 8 HANDLE M4x25 mm QTY 2 SETS PHILLIPS SCREW ROUND HEAD M4x15 mm QTY 29 9 MAGNET AND PLATE QTY 2 SETS PHILLIPS SCREW M4x15 mm QTY 24 a. M4 X 25 - QTY 2 ( 1 is extra ) b. M4 X 15 - QTY 1 c.
MODEL # AXCAMH-TV-RNAB COMPONENTS – KEY DIAGRAM A Fron t/A vant H D JR EL G2 G1 BL F ER JL I Fron t/A vant Fron t/A vant BR G1 G2 C Fron t/A vant Fron t/A vant F Fron t/A vant K Warning Label Fron t/A vant H Fron t/A vant I JR JL 7/19
ASSEMBLY MODEL # AXCAMH-TV-RNAB STEP 1 Front / Avant EL Front / Avant Front / Avant D ER C 2 3 Front / Avant C Front / Avant Front / Avant 1 EL ER D 1. Attach Dividers EL , ER to Bottom Shelf C using Allen Key Srcews I through guide holes from Bottom Shelf C . Use Allen Key 3 to tighten Srews. 2. Attach 6 Cam Lock Pins 2 into pre-drilled holes at underneath of Top Shelf D . 3. Align Cam Lock Pins with guide holes and attach Dividers EL , ER . 4.
ASSEMBLY MODEL # AXCAMH-TV-RNAB STEP 2 2 5 D BR Front / Avant Front / Avant ER EL Front / Avant Front / Avant D Front / Avant 2 C BL 2 C 5 2 1. Insert 4 Wood dowels 5 into guide holes on each Side BL , BR . 2. Use rubber mallet to tap Wood dowels 5 into bottom of holes securely. 1/2 length of dowels should be exposed. 3. Attach 6 Cam Lock Pins 2 into pre-drilled holes on each Side BL , BR . 4.
ASSEMBLY MODEL # AXCAMH-TV-RNAB STEP 3 BL Front / Avant Front / Avant BR C K K 12 1. Attach Bottom Support Leg K to Bottom Shelf C using 4 Phillips Screws 12 . 2. Use Phillips screwdriver to tighten screws. Do not over-tighten.
ASSEMBLY MODEL # AXCAMH-TV-RNAB STEP 4 Front / Avant Front / Avant A Front / Avant BR BL 1 Front / Avant 3 1 A BR Front / Avant Front / Avant Front / Avant BL 1. Attach Top A with Sides BL , BR using Allen Key Screws 1 through guide holes. 2. Use Allen Key 3 to tighten Screws. Do not over-tighten.
ASSEMBLY MODEL # AXCAMH-TV-RNAB STEP 5 Warning Label nt Ava / t Fron A H JL I nt Ava / t Fron JR 6 1. Attach Back Panels I , JL , JR, H to back of cabinet using Phillips Screws Round Head 6 through guide holes. 2. Use Phillips screwdriver to tighten screws. Do not over-tighten.
ASSEMBLY MODEL # AXCAMH-TV-RNAB STEP 6 11 7 F A BR BL 7 F 11 F 1. Attach Adjustable Hinges 7 to Doors F using Phillips Screws 11 into pre-drilled holes on Doors F . 2. Attach Adjustable Hinges on Doors F to Sides BL , BR using Phillips Screws 11 into pre-drilled holes on Sides BL , BR . 3. Use a Phillips screwdriver to tighten screws. Do not over-tighten.
ASSEMBLY MODEL # AXCAMH-TV-RNAB IMPORTANT NOTE: 11 II I Tighten the Screw marked II to fasten hinge. The door may need to be adjusted so that all the spaces between the door and the unit sides are equal. To adjust, follow instructions: 1. Side adjustment 4 mm To move the door towards the side panel, loosen screw I and tighten screw II . To move the door away from the side panel, loosen screw II and tighten screw I . 2.
ASSEMBLY MODEL # AXCAMH-TV-RNAB STEP 7 A ER BL F F BR 10 8 C 10 8 4 A 10 BL F EL C F BR 8 1. Attach Magnet Plates 8 to bottom corner of Doors F using Phillips Screws 10 into pre-drilled holes on Doors F . 2. Attach Magnets 8 using Phillips Screws 10 into pre-drilled holes on Bottom Shelf C . 3. Use a Phillips screwdriver to attach Handles 4 to Doors F .
ASSEMBLY MODEL # AXCAMH-TV-RNAB STEP 8 shelf level 1 shelf support anti - tipping shelf level 2 9 shelf level 3 G1 G1 G2 9 1. Use 4 Shelf Supports 9 for each Shelf G1 , G2 in desired location . 2. 2 Shelf Supports 9 may be used on back top of each Shelf G1 , G2 as a tipping restraint.
FURNITURE TIP OVER RESTRAINT ASSEMBLY WARNING Serious or fatal crushing injuries can occur from furniture tip-over. If the furniture tip over restraint kit is not in the box, please contact our customer service department in order to obtain another kit before using the furniture. STEP 9 NOTE: The screwdriver is not included in the hardware pack.
FURNITURE TIP OVER RESTRAINT ASSEMBLY Furniture Tip Over Restraint Instructions: 1. Attach one of the mounting brackets securely to the back edge of the furniture. Use the shorter screw. 2. Determine where furniture is to be placed and mark location on the wall for mounting bracket screw hole approximately 2 inches below the bracket mounted to the furniture. x 3. 4. 5. 6. 7. Drill a 3/16 inch hole in the wall.
SIMP HOME I I ® L I F E B Y D E S I GN WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.
