Instructions/Assembly Guide
1. Attach hinges on Doors E to Sides
AL , AR
using Phillips Screws 4 into
guide holes.
2. Attach Magnet Plates 7 to bottom corner of Doors E using Phillips
Screws 5 into guide holes on Doors E .
3. Attach Magnets 7 using Phillips Screws 5 into guide holes on Divider
DL , DR .
4. Use Phillips screwdriver to snugly tighten screw.
5. Use Phillips screwdriver to attach Handles 8 to Doors E .
NOTE: The screwdriver is not
included in the hardware pack.
STEP-10
15/19
4
8
C
5
7
7
5
AL
AR
DL
DR
E
E
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
ASSEMBLY MODEL # AXCADM-06GR