Instructions/Assembly Guide

STEP-3

STEP-4

1. Align Drawer Back K with Drawer Bottom L and press firmly into slot.

2. Attach Drawer Back K using two Allen Key Screws 1 through pre-drilled holes on

each Side JL , JR .

3. Use Allen Key 2 to tighten Screws. Do not over-tighten.

NOTE: The screwdriver is not

included in the hardware pack.

1. Use phillips screwdriver to attach Handle 10 to Drawer Front I .

Repeat Step 1 - 4 for the second drawer.

10/19

ASSEMBLY MODEL # AXCADM-06GR