Instructions/Assembly Guide

C
15/20
ASSEMBLY
STEP 11
1. Attach hinges on Doors K to Sides BL , BR using Phillips Screws 6 into pre-drill holes:
- Using Phillips screwdriver to attach Screws 6 at middle hole of hinges for both top &
bottom hinges.
- Adjust the door to ensure they are aligned straight & square with bottom shelf & side.
- Using Phillips screwdriver to tighten the rest of screws 6 into pre-drill holes ( top & bottom
holes on hinges).
2. Attach Magnet Plates 8 to bottom corner of Doors K using Phillips Screws 7 into
pre-drilled holes on Doors K .
3. Attach Magnets 8 using Phillips Screws 7 into pre-drilled holes on Bottom Shelf C .
4. Use Phillips screwdriver to attach Handles 9 to Doors K through guide holes.
MODEL # AXCACTTS-RNAB
First Step
Last Step ( after adjust the door )
9
7
8
8
7
A
BR
K
K
BL
6
6
6