Instructions/Assembly Guide

10/20
ASSEMBLY
STEP 3
1. Use Phillips Screwdriver to attach Handle 9 to Drawer Front L .
Repeat Step 1-4 for the second drawer.
STEP 4
NOTE: The screwdriver is not
included in the hardware pack.
L
9
1
3
1. Align Drawer Back N with Drawer Bottom O and press firmly into slot .
2. Attach back using 2 Allen Key Screws 1 through guide holes on each side.
3. Use Allen key 3 to tighten. Do not over tighten.
MODEL # AXCACTTS-RNAB
L
N
O
MR
ML