Instructions/Assembly Guide

STEP-11
17/22
Front /
Avant
First Step
Last Step ( after adjust the door )
8
9
10
10
10
7
1. Attach hinges on Doors HL , HR to Sides BL , BR using Phillips Screws 10 into pre-drill holes:
- Using Phillips screwdriver to attach Screws 10 at middle hole of hinges for
both top & bottom hinges.
- Adjust the door to ensure they are aligned straight & square with bottom shelf & side.
- Using Phillips screwdriver to tighten the rest of screws 10 into pre-drill holes
( top & bottom holes on hinges).
2. Attach Magnet Plates 9 to bottom corner of Doors HL , HR using Phillips Screws 8 into
pre-drilled holes on Doors HL , HR .
3. Attach Magnets 9 using Phillips Screws 8 into pre-drilled holes on Bottom Shelf E .
4. Use Phillips screwdriver to attach Handles 7 to Doors HL , HR through guide hole.
A
BL
C
Front /
Avant
BR
Front /
Avant
HR
HL
E
ASSEMBLY MODEL # AXCACA47-BL