Instructions/Assembly Guide

NOTE: The screwdriver is not

included in the hardware pack.

STEP-3

STEP-4

1. Align Drawer Back L with Drawer Bottom M and press firmly into slot.

2. Attach Drawer Back L using 2 Allen Key Screws 1 through guide holes on

each Side KL , KR .

3. Use Allen Key 4 to tighten screws. Do not over-tighten.

1. Use Phillips screwdriver to attach Handle 7 to Drawer Front J .

Repeat Step 1 - 4 for the second drawer.

10/22

ASSEMBLY MODEL # AXCACA47-BL