TM SIMP HOME ® LIFE BY DESIG N TM ACADIAN / NORMANDY / BRUNSWICK ENTRYWAY STORAGE CABINET MODEL # AXCACA47-BL 1/22
TM SIMP HOME ® LIFE BY DESIG N TM Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am –4 pm EST or go to www.simpli-home.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION CAUTION: Injuries and damage can occur from furniture tip over if product is not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided with the product. Consult our assembly instructions for help.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
PRE-ASSEMBLY INFORMATION PART DESCRIPTION A Fron t/A MODEL # AXCACA47-BL BL BR van t TOP QTY 1 t van t/A Fron Fron t/A vant LEFT SIDE QTY 1 D C RIGHT SIDE QTY 1 E Fron t/A Fron t / Av ant SMALL DIVIDER QTY 1 LARGE DIVIDER QTY 1 F / Av BOTTOM SHELF QTY 1 HL G Fron t vant ant Front / Ava nt MIDDLE FRAME QTY 1 CABINET SHELF QTY 2 LEFT DOOR QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION PART DESCRIPTION HR IL IR LEFT BACK PANEL QTY 1 RIGHT DOOR QTY 1 J KL Warning Label RIGHT BACK PANEL QTY 1 KR LEFT DRAWER SIDE QTY 2 DRAWER FRONT QTY 2 L MODEL # AXCACA47-BL RIGHT DRAWER SIDE QTY 2 M DRAWER BACK QTY 2 DRAWER BOTTOM QTY 2 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION HARDWARE DESCRIPTION 1 2 6 PHILLIPS SCREW ROUND HEAD M4 X 15mm QTY 18 9 WOOD DOWEL M8 X 30mm QTY 10 7 SHELF SUPPORT QTY 12 PHILLIPS SCREW M3 X 12mm QTY 12 ALLEN KEY QTY 1 8 HANDLE M4 X 15 mm -2PC M4 X 25 mm - 2PC QTY 4 SET 11 10 MAGNET AND PLATE QTY 2 SET 4 3 CAM LOCK PIN CAM LOCK QTY 14 SETS ALLEN KEY SCREW M6 X 30mm QTY 18 5 MODEL # AXCACA47-BL PHILLIPS SCREW M3 X 15mm QTY 8 a. M4 X 25mm - QTY 2 ( 1 is extra ) b. M4 X 15mm - QTY 1 c.
COMPONENTS-KEY DIAGRAM Fron MODEL # AXCACA47-BL t / Av ant Fron t / Av A IR ant IL D F BR Fron t / Avan t Front Fron / Ava nt t / Av ant Fron t / Av BL ant G G C Fron t E / Ava nt HR HL L KL KR M J 8/22
ASSEMBLY MODEL # AXCACA47-BL STEP-1 J KR KL KR KL J 2 1. Attach 4 Cam Lock Pins 2 to pre-drilled holes at back of Drawer Front J . 2. Align Cam Lock Pins with guide holes and attach Drawer Sides KL , KR . 3. Insert 2 Cam Locks 2 into guide holes on each Drawer Side KL , KR . 4. Use flathead screwdriver secure Cam Locks. STEP-2 M KR J KL 1. Slide Drawer Bottom M firmly into slots on Drawer Sides KL , KR and Drawer Front J .
ASSEMBLY MODEL # AXCACA47-BL STEP-3 KR L M 4 J KL 1 1. Align Drawer Back L with Drawer Bottom M and press firmly into slot. 2. Attach Drawer Back L using 2 Allen Key Screws 1 through guide holes on each Side KL , KR . 3. Use Allen Key 4 to tighten screws. Do not over-tighten. STEP-4 NOTE: The screwdriver is not included in the hardware pack. J 7 1. Use Phillips screwdriver to attach Handle 7 to Drawer Front J . Repeat Step 1 - 4 for the second drawer.
ASSEMBLY MODEL # AXCACA47-BL STEP-5 3 1 4 Front / Avant C Front / Avant E 1. Insert 2 Dowels 3 into guide holes on bottom of Large Divider C . 2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Attach Bottom Shelf E to Large Divider C using 2 Allen Key Screws 1 . 4. Use Allen Key 4 to tighten Screws. Do not over-tighten.
ASSEMBLY MODEL # AXCACA47-BL STEP-6 1 F Front / Avant Front / Avant Front / Avant 4 Front / Avant C E 1. Attach Middle Frame F to Large Divider C using 2 Allen Key Screws 1 . 2. Use Allen Key 4 to tighten Screws. Do not over-tighten.
ASSEMBLY MODEL # AXCACA47-BL STEP-7 Front / Avant 2 D Front / Avant Front / Avant F Front / Avant C E 1. Attach 2 Cam Lock Pins 2 into pre-drilled holes at the top of Middle Frame F . 2. Align Cam Lock Pins with guide holes on Small Divider D . 3. Insert 2 Cam Locks 2 into guide holes on Small Divider D . 4. Use flathead screwdriver secure Cam Locks.
ASSEMBLY MODEL # AXCACA47-BL STEP-8 3 3 Front / Avant BL Front / Avant C E BR Front / Avant F Front / Avant D Front Side 2 1. Insert 4 Dowels 3 into guide holes on Middle Frame F ( 2 dowels on each side ). 2. Insert 4 Dowels 3 into guide holes on Bottom Shelf E ( 2 dowels on each side ). 3. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/2 length of Dowels should be exposed. 4. Attach 2 Cam Lock Pins 2 into pre-drilled holes on each Side BL , BR . 5.
ASSEMBLY MODEL # AXCACA47-BL STEP-9 1 1 4 4 E Front / Avant D Front / Avant Front / Avant C Front / Avant BL Front / Avant A BR 1. Attach Top A to Sides BL , BR and Small Divider D using 6 Allen Key Screws 1 (2 screws on each Side and Small Divider). 2. Use Allen Key 4 to tighten Screws. Do not over-tighten.
ASSEMBLY MODEL # AXCACA47-BL STEP-10 Note: Thebackofthecabinetframedoesnothavepre-driledholestoattachthebackpanels. Warning Label Fron t/A A vant IR Fron t/A vant IL BR 5 1. Attach Back Panels IL , IR to back frame of cabinet using 18 Phillips Screws Round Head 5 through guide holes. 2. Use Phillips Screwdriver to tighten screws.
ASSEMBLY MODEL # AXCACA47-BL 7 STEP-11 Fron t/A A van t BR BL Fron HR t/A vant C Fron t / Av ant E First Step 10 HL Last Step ( after adjust the door ) 8 9 10 10 1.AttachhingesonDoorsHL,HRtoSidesBL,BRusingPhilpsScrews10intopre-drilholes: -UsingPhilpsscrewdrivertoattachScrews10atmiddleholeofhingesfor bothtop&bottomhinges. -Adjustthedoortoensuretheyarealignedstraight&squarewithbottomshelf&side. -UsingPhilpsscrewdrivertotightentherestofscrews10intopre-drilholes (top&bottomholesonhinges).
ASSEMBLY MODEL # AXCACA47-BL STEP-12 shelf level 1 shelf support anti - tipping shelf level 2 6 shelf level 3 G 6 G G G 1. Use 4 Shelf Supports 6 for each Cabinet Shelf G in desired location. 2. 2 Shelf Supports 6 may be used on back top of each Cabinet Shelf G as a tipping restraint.
ASSEMBLY MODEL # AXCACA47-BL STEP-13 1. Turn the wood lock ( on the bottom frame ) to be perpendicular to the frame for safety stop ( intended to keep the drawers from pulling all the way out ).
FURNITURE TIP OVER RESTRAINT ASSEMBLY WARNING Serious or fatal crushing injuries can occur from furniture tip-over. If the furniture tip over restraint kit is not in the box, please contact our customer service department in order to obtain another kit before using the furniture. STEP-14 NOTE: The screwdriver is not included in the hardware pack.
FURNITURE TIP OVER RESTRAINT ASSEMBLY Furniture Tip Over Restraint Instructions: 1. Attach one of the mounting brackets securely to the back edge of the furniture. Use the shorter screw. x P 2. Determine where furniture is to be placed and mark location on the wall for mounting bracket screw hole approximately 2 inches below the bracket mounted to the furniture. x 3. 4. 5. 6. 7. P Drill a 3/16 inch hole in the wall.
TM SIMP HOME ® LIFE BY DESIG N TM WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.
