Full Product Manual

STEP-6

13/18

Front /

Avant

Front /

Avant

Front /

Avant

1. Attach hinges on Doors F to Sides BL , BR and Right Divider CR using Phillips Screws 10

into pre-drill holes:

- Using Phillips screwdriver to attach Screws 10 at middle hole of hinges for

both top & bottom hinges.

- Adjust the door to ensure they are aligned straight & square with bottom shelf & side.

- Using Phillips screwdriver to tighten the rest of screws 10 into pre-drill holes

( top & bottom holes on hinges).

2. Attach Magnet Plates 9 to bottom corner of Doors F using Phillips Screws 8 into

pre-drilled holes on Doors F .

3. Attach Magnets 9 using Phillips Screws 8 into pre-drilled holes on Bottom Shelf D .

4. Use Phillips screwdriver to attach Handles 7 to Doors F through guide hole.

ASSEMBLY MODEL # AXCACA39-RNAB

First Step

Last Step ( after adjust the door )