TM SIMP HOME ® LIFE BY DESIG N TM ACADIAN / NORMANDY / BRUNSWICK 9 CUBE STORAGE / BOOKCASE MODEL # AXCACA21-LGB 1/19
TM SIMP HOME ® LIFE BY DESIG N TM Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am –4 pm EST or go to www.simpli-home.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION CAUTION: Injuries and damage can occur from furniture tip over if product is not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided with the product. Consult our assembly instructions for help.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
PRE-ASSEMBLY INFORMATION . PART DESCRIPTION A MODEL # AXCACA21-LGB . . BL BR Front Fron t/A / Avan Front t / Avan t van t TOP QTY 1 LEFT SIDE QTY 1 . RIGHT SIDE QTY 1 . . C C2 C1 BOTTOM DIVIDER ( L&R Same) QTY 2 MIDDLE DIVIDER ( L&R Same) QTY 2 . . D TOP DIVIDER ( L&R Same) QTY 2 . E FL Fron t/A TOP SHELF QTY 2 . vant BOTTOM SHELF QTY 1 LEFT BACK PANEL QTY 1 .
PRE-ASSEMBLY INFORMATION . MODEL # AXCACA21-LGB HARDWARE DESCRIPTION 1 2 . 3 CAM LOCK PIN CAM LOCK QTY 30 SETS ALLEN KEY SCREW M6 X 30mm QTY 6 . . ALLEN KEY QTY 1 . 4 5 PHILLIPSSCREWROUNDHEAD M4 X 15mm QTY 36 a. M4 X 25mm - QTY 2 ( 1 is extra ) b. M4 X 15mm - QTY 1 c.
COMPONENTS-KEY DIAGRAM MODEL # AXCACA21-LGB A t FL Front / Avan t C2 C2 / Ava BL / Avan F1 FR Front Front nt BR D C1 C1 D C C Front E / Avan t 7/19
ASSEMBLY MODEL # AXCACA21-LGB STEP-1 C C Front / Avant E 1 3 1. Attach Bottom Dividers C using six Allen Key Screws 1 through guide holes on Bottom Shelf E . 2. Use Allen Key 3 to tighten Screws. Do not over-tighten STEP-2 C C D Front / Avant E 1. Align Wood Dowels with guide holes on first Top Shelf D and attach Bottom Dividers C to Top Shelf D .
ASSEMBLY MODEL # AXCACA21-LGB STEP-3 C C E C1 D C1 C 1. Align Wood Dowels with guide holes on Top Shelf D and attach Bottom Dividers C1 to Top Shelf D . C E C1 D C1 STEP-4 C1 D C C1 C E Front / Avant D C1 D C C1 C D Front / Avant 1. Align Wood Dowels with guide holes on second Top Shelf D and attach Bottom Dividers C1 to Top Shelf D .
ASSEMBLY MODEL # AXCACA21-LGB P STEP-5 t/A Fron X vant BL 2 Fron t/A vant BR 1. Attach nine Cam Lock Pins 2 into pre-drilled holes on each Side BL,BR . 2. Use Phillips screwdriver to secure Cam Lock Pins. Do not over-tighten.
ASSEMBLY MODEL # AXCACA21-LGB BR Front / Avant Front / Avant STEP-6 D D E BR Front / Avant Front / Avant 1. Align Cam Lock Pin with guide holes on parts E , D and attach Right Side BR to parts D , E . D 2 D E 2. Insert three Cam Locks 2 into guide holes on each part D , E . 3. Use Phillips screwdriver to secure Cam Locks.
ASSEMBLY MODEL # AXCACA21-LGB STEP-7 Front / Avant BL D Front / Avant D BR E Front / Avant BL 2 D Front / Avant D BR E 1. Repeat Step-6 for the Left Side BL .
ASSEMBLY MODEL # AXCACA21-LGB STEP-8 E C D C BL D C1 C1 C2 BR C2 1. Align Wood Dowels with guide holes on Top Shelf D and attach Top Dividers C2 to Top Shelf D .
ASSEMBLY MODEL # AXCACA21-LGB STEP-9 P X 2 Fron t/A van t A 1. Attach twelve Cam Lock Pins 2 into pre-drilled holes on Top A . 2. Use Phillips screwdriver to secure Cam Lock Pins. Do not over-tighten.
ASSEMBLY MODEL # AXCACA21-LGB Front / Avant BL Front / Avant STEP-10 C2 A BR Front / Avant Front / Avant C2 E 1. Align Cam Lock Pin with guide holes on parts BL , BR , C2 and attach Top A to parts BL , BR , C2 . A C2 Front / Avant Front / Avant BL Front / Avant C2 BR 2 E 2. Insert three Cam Locks 2 into guide holes on each part BL , BR , C2 . 3. Use Phillips screwdriver to secure Cam Locks.
ASSEMBLY MODEL # AXCACA21-LGB STEP-11 A Front / Avan t Warning Label Front / Avan t FL F1 FR Note: Thebackofthebookcaseframedoesnothavepre-driledholestoattachthebackpanels. A Front Front / Avan t / Avan 4 t FL F1 FR 1. Attach the Back Panels FL , FR , F1 to back frame using Phillips Screws Round Head 4 through guide holes from Back Panels. 2. Use Phillips Screwdriver to tighten screws. Do not over-tighten.
FURNITURE TIP OVER RESTRAINT ASSEMBLY WARNING Serious or fatal crushing injuries can occur from furniture tip-over. If the furniture tip over restraint kit is not in the box, please contact our customer service department in order to obtain another kit before using the furniture. STEP-12 NOTE: The screwdriver is not included in the hardware pack.
FURNITURE TIP OVER RESTRAINT ASSEMBLY Furniture Tip Over Restraint Instructions: 1. Attach one of the mounting brackets securely to the back edge of the furniture. Use the shorter screw. x P 2. Determine where furniture is to be placed and mark location on the wall for mounting bracket screw hole approximately 2 inches below the bracket mounted to the furniture. x 3. 4. 5. 6. 7. P Drill a 3/16 inch hole in the wall.
TM SIMP HOME ® LIFE BY DESIG N TM WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.
