Quick Start Guide

9/18
ASSEMBLY
STEP 3
1. Use Phillips Screwdriver to attach Handle 8 to Drawer Front I .
Repeat Step 1-4 for the second drawer.
STEP 4
NOTE: The screwdriver is not
included in the hardware pack.
1. Align Drawer Back J with Drawer Sides K .
2. Attach back using two Allen Key Screws 4 through pre-drilled holes on each Side K .
2. Use Allen Key 6 to tighten screws. Do not over-tighten.
8
8
I
4
6
L
J
K
K
MODEL # 3AXCSAW-06