Instructions / Assembly

ASSEMBLY

STEP 3

1. Use Phillips Screwdriver to attach Handle 8 to Drawer Front I .

Repeat Step 1-4 for the second drawer.

STEP 4

NOTE: The screwdriver is not

included in the hardware pack.

1. Align Drawer Back J with Drawer Sides KL , KR .

2. Attach back using two Allen Key Screws 4 through pre-drilled holes on each Side KL , KR .

3. Use Allen Key 6 to tighten screws. Do not over-tighten.

MODEL # 3AXCSAW-06

10/19