Instructions / Assembly

ASSEMBLY
STEP 6
11/13
1. Insert assembled drawer into slots on assembled table.
2. Drawer can be inserted into table’s opening.
MODEL # 3AXCRGL002-SB
STEP 7
1. Insert 2 Dowels 5 into top corners of each Side B .
2. Use rubber mallet to tap Dowels into bottom of holes securely. 1/2 length of5
Dowels should be exposed.
3. Align pre-drilled holes on bottom corners of Top A with Dowels 5 in Sides B .
4. Using Allen Key Screw 1 attach Top A to Sides B .
5. Use Allen key 3 to tighten Allenkey Screw. Do not over-tighten .
A
B
B
1
5
3