TM TM
TM TM
PRE-ASSEMBLY INFORMATION MODEL # 3AXCDRP-10 PART DESCRIPTION F GL H1 H2 SHELF QTY 1 GR 5/20
PART DESCRIPTION DRAWER BACK QTY 2 RIGHT BACK PANEL QTY 1 DRAWER BOTTOM QTY 2 LEFT BACK PANEL QTY 1 MIDDLE BACK PANEL QTY 1 6/20
HARDWARE DESCRIPTION 2 5 8 FURNITURE TIP OVER RESTRAINT QTY 1 SET Required Flathead screwdriver Phillips screwdriver Not Included 7/20
I I I J J J J J J F F E B P K K K K C H1 H2 H2 H1 N O L
L 9 1. Attach 4 Cam Lock Pins 9 to pre-drilled holes at back of Drawer Front L . 2. Align Cam Lock Pins with pre-drilled holes and attach Drawer Sides . 3. Insert 2 Cam Locks 9 into pre-drilled holes on each Drawer Side . 4. Use flathead screwdriver secure Cam Locks.
N L O 1 3 1. Align Drawer Back N with Drawer Bottom O and press firmly into slot. 2. Attach Drawer Back N using 2 Allen Key Screws 1 through pre-drilled holes on each Side . 3. Use Allen Key 3 to tighten screws. Do not over-tighten. Repeat Step 1-3 for the second drawer.
STEP-4 E F J J J F E
I I F 1. Align Dowels on Divider of Wine Rack I with pre-drilled holes on Shelf F . 2. Attach Divider of Wine Rack I to Shelf F .
MODEL # 3AXCDRP-10 ASSEMBLY B
1 3 3 1 C 1. Attach Bottom Shelf C to 2 Sides AL , AR and 2 Dividers DL , DR using 12 Allen Key Screws 1 (3 Screws on each Side and Divider ). 2. Use Allen Key 3 to tighten screws. Do not over-tighten.
3 2 H1 C H2 H2 H1 1. Attach Legs H1 , H2 to Bottom Shelf C using 8 sets Allen Key Bolts, Lock Washers and Washers 2 (2 sets on each Leg). 2. Use Allen Key 3 to tighten Bolts. Do not over-tighten. B 5 PR P 1. Attach Back Panels P , PL , PR to back frame of sideboard by using 26 Phillips Screws 5 . 2. Use Phillips screwdriver to snugly tighten screw.
NOTE: The screwdriver is not included in the hardware pack.
4 D K K K K K
10 10
TM TM WARRANTY
