Instructions / Assembly

ASSEMBLY
1. Align Small Drawer Back N with Small Drawer Bottom Q and press firmly into slot .
2. Attach Drawer Back using 2 Allen Key Screws 2 through pre-drilled holes on
each Side K .
3. Use Allen Key 5 to tighten screws. Do not over-tighten.
1. Use Phillips screwdriver to attach Handle 4 to Small Drawer Front I .
STEP 3
STEP 4
9/22
NOTE: The screwdriver is not
included in the hardware pack.
Repeat Step 1-4 for the second small drawer .
MODEL # 3AXCART-04