Instructions / Assembly

ASSEMBLY
1. Align Large Drawer Back L with Large Drawer Bottom O and press firmly into slot.
2. Attach Drawer Back using 2 Allen Key Screws 2 through pre-drilled holes on
each Side J .
3. Use Allen Key 5 to tighten screws. Do not over-tighten.
1. Use Phillips screwdriver to attach Handle 4 to Large Drawer Front G .
STEP 11
STEP 12
NOTE: The screwdriver is not
included in the hardware pack.
MODEL # 3AXCART-04
Repeat Step 1-4 for the other two large drawers.
13/22