Instructions / Assembly

ASSEMBLY
1. Align Drawer Back M with Drawer Bottom N and press firmly into slot .
2. Attach Drawer Back using 2 Allen Key Screws 2 through pre-drilled holes on
each Side L .
3. Use Allen Key 5 to tighten screws. Do not over-tighten.
1. Use Phillips screwdriver to attach Handle 4 to Drawer Front K .
STEP 3
STEP 4
8/18
NOTE: The screwdriver is not
included in the hardware pack.
MODEL # 3AXCART-03
Repeat Step 1-4 for the other three drawers.