Instructions / Assembly

8/16
ASSEMBLY
STEP 1
1. Insert Dowel 6 into Divider C .
2. Use rubber mallet to tap Dowels 6 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Align drilled holes on bottom of Back F with Dowel 6 on Divider C .
( Note: please pay close attention to the location of the 2 small guide holes which
accommodate the lid support. They need to be on the same side as the hinges .)
4. Using 2 Allen Key Screws 3 to attach Back F to Divider C .
MODEL # 3AXCARLBEN-DB
Small pre-drilled holes
Hinge
6
C
3
F
4
Up
Si
d
e
/
V
er
tica
l