Instructions / Assembly

8/15
1. Insert Dowel 6 into Divider C .
2. Use rubber mallet to tap Wood Dowels 6 into holes securely. 1/2 length of dowels
should be exposed.
3. Align drilled holes on bottom of Back F with Dowel 6 on Divider C .
( Note: please pay close attention to the location of the 2 small guide holes which
accommodate the lid support. They need to be on the same side as the hinges .)
4. Using 2 Allen Key Screws 3 to attach Back F to Divider C .
ASSEMBLY
MODEL # 3AXCA DABEN-W
STEP 1
Small pre-drilled holes
3
Hinge
6
Up S
id
e
/ Vertical