User Guide

10 30 50 70 90
Pinpoint/Mute/Confirm Button:
*Pinpoint: Press and hold down
on detection screen.
*Mute: Press ONCE while in
detection screen.
*Confirm:
1) Ground Balance Function:
Press and hold to auto ground
balance while in the ground balance
setting ( ).
2) Reject/Accept Targets:
Press once to reject or accept
targets while in notch discrimination
setting ( ).
Target ID Scale
ID Notches
(Groups of 5 IDs)
Modes
(Field/Park 1 /Park 2/Beach/All Metal)
Depth Indicator
Battery Indicator
Sensitivity Indicator
Target ID
Mineralization Indicator
Sensitivity Up / Back
In the main screen the up arrow is
used to increase the sensitivity and
in the settings menu, it is used to
exit the settings and go back
to the main screen.
*Left side navigation in notch
discrimination and mode selection
*Change the value of any setting.
Settings Button:
Each time you press it, the next
setting on the bar will be selected
and its value will be displayed on
screen.
*Right side navigation in notch
discrimination and mode selection
*Change the value of any setting.
*On/Off: Press and hold down for about 3 seconds.
*Sensitivity Down: Press one by one.
QUICK GUIDE
55000506_EN