User`s manual

22
39
40
Note:
"S" is to indicate totals across daylight savings adjustment.
"*" is to indicate the following meanings.
(1) Rounded time result comes to 0:00
(2) Daylight savings adjustment was done in the period of calculation.
"B" is to indicate accumulation result includes auto break deduction.
5. PRINT EXAMPLE
Calculates time
between punches
Optional automatic
break deduction
from totals
Accumulates total
worked time
Verifies correct
card number and
side of card for
printing
Month
Date
Time
© SIMPLEX TIME RECORDER CO. 1-800-626-6206
www.simplexgrinnellstore.com
1950-4301
22
39
38
Card reset
If you want to reset the card manually before the end of pay period, you can use the "Card
reset" mode.
2
Push the FUNCTION and CHANGE
button for 5 seconds. The number of
cards that you are using will be shown
on the display.
Example: The number of the card you want to reset is "003".
The number
of cards
3
In the example, insert the card
"003" or push the CHANGE button
to show the card number "003" and
then push the SET button.
4
Push the SET button.
2
Push the FUNCTION and CHANGE
button for 5 seconds. The number of
cards that you are using will be shown
on the display.
3
Push the CHANGE button to show
"ALL" and then push the SET
button.
4
Push the SET button one more time.
FUNCTION CHANGE
FUNCTION CHANGE
FUNCTION CHANGE SET
FUNCTION CHANGE
1
Remove the cover.
Cover
The number
of cards