User`s manual

22
27
28
Setting the Daylight Savings Time
Today (present day)
Starting date of Daylight
Savings Time
Ending date of Daylight
Savings Time
Wednesday,
January 6, 2010
Sunday,
March 14, 2010
Sunday,
November 7, 2010
The second Sunday of
March
The first Sunday of
November
Example
Automatic DST correction
Automatic DST correction
By default, the daylight savings time is already set to start on the second Sunday of March and
to end on the first Sunday of November. The time clock automatically updates the settings
every year. No further manual setting is necessary.
If you are located in an area that does not observe Daylight Savings Time, you can also disable
DST function by changing the display of "Month" of the starting setting to " ". (Refer to
"Deleting the Daylight Savings Time settings".)
If the above pre-determined DST dates should change then use this function to change the DST
clock dates. Please refer to following example.
22
27
26
The functions for the buttons on the front of the recorder can be set. There are three
options; Required, Optional, Disabled.
The default setting is Optional.
Example
Select "Required" for the button.
3
1
Push the FUNCTION button for 5
seconds.
2
Push the FUNCTION button and
position the " " next to the
"BUTTON FUNCTION" mark.
Order Option
Required
Optional
Disabled
1
2
3
SET
FUNCTION CHANGE
4
BUTTON
FUNCTION
SET
FUNCTION CHANGE
BUTTON
FUNCTION
Required
In the case of the example, push the
CHANGE button to set at "1". And
then push the SET button.
Push the SET button once again.
You have completed this setting. Go to the next setting listing in
"Default Settings" on page 7 to continue with the setup.
Setting the Button Function (In/Out)
(continued)