User`s manual

22
19
20
4
In this case, push the CHANGE
button to set at "1" and then push
the SET button. At that moment, the
flashing of the display will change
to the right-side number.
Order Option
AM/PM
24 hour
1
2
Set the "Hour" print format.
SET
FUNCTION CHANGE
PRINT
FORMAT
Hour
Print
format
5
In this case, push the CHANGE
button to set at "1" and then push
the SET button.
Order Option
Regular minutes
Hundredths
1
2
6
Push the SET button once again.
Set the "Minute" print format
for totals only.
SET
FUNCTION CHANGE
PRINT
FORMAT
Minute
Print
format
Punch times only show in minutes.
You have completed this setting. Go to the next setting listing in
"Default Settings" on page 7 to continue with the setup.
22
19
18
Setting the Print Format
1
Push the FUNCTION button for 5
seconds.
3
In this example, push the CHANGE
button to set the left-side number at
"2" and then push the SET button.
At that moment, the flashing of the
display will change to the middle
number.
Order Option
Date
Day of the week
1
2
You can select the following "Print Format".
"Date" or "Day of the week" print format
"AM/PM" or "24 HR" hour print format
"Regular" or "Hundredths" minutes print format
If error " E-49 " appears when you try to change settings, then you must reset all cards
The Default setting is "Day of the Week, AM/PM, and Regular Minutes".
before proceeding. ( See "All cards reset" on page 38.)
Example
"Day of the week" + "AM/PM" hour + "Regular" minutes
Example of printing ----- F
R
4:30P
Set the "Date/D.O.W." print format.
SET
FUNCTION CHANGE
2
Push the FUNCTION button and
position the " " under the "PRINT
FORMAT" mark.
PRINT
FORMAT
SET
FUNCTION CHANGE
PRINT
FORMAT
Date/D.O.W.
Print
format