User`s manual

22
13
14
You have completed this setting. Go to the next setting listing in
"Default Settings" on page 7 to continue with the setup.
Setting Weekly Period in Payroll Mode
1
2
In the case of weekly period, push
the CHANGE button to set the left-
side number at "2" and then push
the SET button. At that moment, the
flashing of the display will change
to the right-side number.
Example: Weekly period in Payroll Mode ----- the start day is Monday.
Set the "Mode".
SET
SET
Weekly period
FUNCTION CHANGE
FUNCTION CHANGE
MODE
MODE
Sunday
Monday
Tuesday
Wednesday
1
2
3
4
Thursday
Friday
Saturday
5
6
7
3 Starting day
4 Push the SET button once again.
To set pay period, you have to input
a starting day. In this case, you
have to set Monday.
Push the CHANGE button to set at
"2" and then push the SET button.
Set the "Starting day of the week".
SET
Starting day
FUNCTION CHANGE
MODE
Push the FUNCTION button for 5
seconds and make sure the " " is
positioned under the "MODE" mark.
22
13
This time recorder can operate in one of two modes; Payroll Mode or Job Cost Mode.
In Payroll Mode and Job Cost Mode, the recorder prints total elapsed time between
IN(Start) and OUT(Stop), and also prints a running total of accumulated time per time card
on each line. The clock matches pairs of punches and calculates the elapsed time between
that pair using predefined rounding rules. The recorder always prints the actual time on the
time card, regardless of rounding rules. In Payroll Mode the hours accumulate and reset
based on "pay period settings" that are configured during setup. In Job Cost Mode the
hours for each unique card can accumulate and reset based on "manual card reset"
("cleared") by performing a manual operation on the time recorder.
Setting the Mode
Order Option
Monthly
Weekly
Bi-Weekly
Semi-Monthly
JOB COST
1
2
3
4
5
Payroll Mode
Payroll Mode
Job Cost Mode
To set to "Weekly" period, go to page 14.
To set to "Monthly" period, go to page 15.
To set to "Bi-Weekly" period, go to page 16.
To set to "Semi-Monthly" period, go to page 17.