System information

Simplex, the Simplex logo, TrueAlarm, WALKTEST, IDNet, SmartSync, and TrueAlert are either trademarks or registered trademarks of Simplex Time Recorder Co. in the U.S.
and/or other countries. NFPA 72 and National Fire Alarm Code are registered trademarks of the National Fire Protection Association (NFPA).
S4010-0001-4 4/00
Westminster, Massachusetts 01441-0001 USA
visit us on the world wide web at www.simplexnet.com
All specifications and other information shown were current as of printing and are subject to change without notice.
4010-9806
Class A
Module
4010-9806
Class A
Module
TB4TB3
P2
TB1
NAC 1
NAC 2
NAC 3 NAC 4
SHLD
SHLD
EXT N2
IDNet
——
A +
A -
B +
B -
NC C NO
AUX2AUX1 BATTERY
AUX
POWER
NC C NO
4010-9813,
4098-9814
4010-9823,
or 4010-9824
Expansion Power Supply
4010-9809
or -9829
City Module
4010-9820
Meter Module
or
4010-9825
24 VDC Power
Distribution
Block
TB5 TB6 TB7 TB8
SUPV
ACK
SYSTEM
SUPERVISORY
ALARM
ACK
FIRE
ALARM
TROUBLE
ACK
SYSTEM
TROUBLE
ALARM
SILENCE
ALARM
SILENCED
SYSTEM
RESET
AC
POW ER
MENU
FUNCTION
ENTER
DISABLE
ENABLE
EXIT
CLEAR
PREVIOUS
NEXT
Expansion
Slots 1 & 2
Typical conduit entry area
(cut holes as required)
Knockout
screw/nail holes
(for semi-flush
mount)
Wall thickness guides
for 5/8" (16 mm)
wall board)
Wall thickness guides
for 1/2" (13 mm)
wall board
Door, 5/8"
(16 mm) thick
Battery Area
No conduit entry or wiring in this area
6 1/4"
(159 mm)
5 1/2"
(140 mm)
18" (457 mm)
21"
(533 mm)
14 1/2" (368 mm)
3/4"
(19 mm)
WATERFLOW-
LEFT WING
GROUND FAULT
WATERFLOW-
RIGHT WING
SUPV
ACK
SYSTEM
SUPERVISORY
ALARM
ACK
FIRE
ALARM
TROUBLE
ACK
SYSTEM
TROUBLE
ALARM
SILENCE
ALARM
SILENCED
SYSTEM
RESET
AC
POWER
MENU FUNCTION ENTER
DISABLE
ENABLE
EXIT
CLEAR
PREVIOUS
NEXT
TB4TB3
P2
TB1
TB5 TB6 TB7 TB8
Door and exposed
cabinet dimension
for semi-flush mount
1 3/8" (35 mm)
Wall board position
reference for
semi-flush mount
Shaded area is for non-power limited wiring
Internal straps are
provided for wiring
management
(2 each side)
4010 Module Layout Reference
Mounting Information