Specifications

Section 2: PCB Installation and Startup

Aspire S Hardware Manual Section 2: PCB Installation and Startup ◆ 2-49

Identifying Port Location

Port information such as PCB type, port numbers, PCB status, and individual port status can be obtained

from the system. To obtain a System Report containing PCB information, the system must be connected to a

PC or terminal using the serial port connector on the CPU.

Running program 90-13-03 in MAINTENANCE PROGRAMS prints a system PCB report. Refer to Pro-

gram 90-13-03 : System Information Output in the Software Manual. The following is a typical report:

<<SYSTEM INFORMATION>> 011/03/03 09:49

slot location type assign port condition note

1 1-1 ESIU 1- 8 Running ****---- -------- Connect:*

2 1-2 SLIU 9- 10 Running

3 1-3 ESIU 11- 18 Running

4 1-4 SLIU 19- 26 Running

5 1-5 COIU 1- 4 Running

6 1-6 DIOPU 5- 6 Not Install

7 1-7 - none -

8 1-8 - none -

9 2-1 - none -

10 2-2 - none -

11 2-3 - none -

12 2-4 - none -

13 2-5 - none -

14 2-6 - none -

15 2-7 - none -

16 2-8 - none -