Specifications

Section 4: Telephones and Optional Equipment
Aspire S Hardware Manual Section 4: Telephones and Optional Equipment ◆ 4-21
4
Figure 4-16: 2PGDAD CABLE CONNECTION
Programming
➻ 10-03-01 : PCB Setup - Terminal Type (Circuit 1)
10-03-06 : PCB Setup - Terminal Type (Circuit 2)
Confirm that the 2PGDAD has defined the circuit types as either type “7” for External Ringer
or “9” for ACIs. (If the 2PGDAD circuit had previously been defined for another type of cir-
cuit, unplug the 2PGDAD and plug it back in order to reset the circuit types.)
➻ 10-05-01 : General Purpose Relay Setup
Define which relay circuits (5-8) on the 2PGDAD Module are used for General Purpose
Relays.
➻ 11-06-01 : ACI Extension Numbering
Assign extension numbers to ACI software ports. Select a number outside of the normal
extension number range.
Aspire S: ACI Ports 1-8
Aspire: ACI Ports 1-96
➻ 11-08-01 : ACI Group Pilot Number
Assign pilot numbers to ACI groups. When a user dials the pilot number, they reach an avail-
able ACI software port within the group.
Aspire S: ACI Groups 1-4
Aspire: ACI Groups 1-16
0893100 - 160
PGDAD Module
To ESIU PCB
CN2 or CN3
CN1
CN2
CN3
External Ringer
OR
External Recording System